Red_Dash
19-07-2014, 22:52
Went out for a drive this afternoon and after about 15 miles, the car was stalling when the revs dropped to about 10,000 RPM.
I traced this to a loose connection of the grey wiring loom connector on the idle control valve. Turns out that there is no metal clip on the connection and so the problem could happen again. If you have the right size clip you could send me, then that would be great. Naturally I'll pay for the cost of the clip and postage.
Please let me know.
Thanks!
Dave
I traced this to a loose connection of the grey wiring loom connector on the idle control valve. Turns out that there is no metal clip on the connection and so the problem could happen again. If you have the right size clip you could send me, then that would be great. Naturally I'll pay for the cost of the clip and postage.
Please let me know.
Thanks!
Dave