View Full Version : forged builds
turbominicooper
12-09-2013, 11:03
best reputation company for building forged engines?
im wanting to have my f7r forged but would also like it maybe bored out to a 2.1 or 2.2 (if possible).
any brands out there?
2.1 I think is the max Danny@519 automotive is your guy he built mine
turbominicooper
12-09-2013, 13:39
i thought 2.1 was the one.
is yours a good build, how many miles has it covered so far?
turbominicooper
12-09-2013, 13:40
2.1 I think is the max Danny@519 automotive is your guy he built mine
i cant find user Danny@519 :(
i cant find user Danny@519 :(
google ' 519 Automotive ' :winkey:
Chris197F1
12-09-2013, 14:29
Yeah is one Facebook too, he's a trader on Clio197.net and has a very good rep on there
turbominicooper
12-09-2013, 16:46
found him, thanks guys
16v_paddy
12-09-2013, 19:12
2.1 I think is the max Danny@519 automotive is your guy he built mine
He's got a forged 2.1 f7 lump that belongs to some handsome bastard, sat on a stand at his workshop at the moment 8-) 2.1 is deffo the maximum you can go to with wossner pistons & I doubt trying to find other makes with bigger sizes will be worth the time money or effort
forged for what purpose? if its turbo then overbore is pointless, just weakens the block for no good reason or gain, standard bore would be fine
ThRaXaIR
14-09-2013, 13:04
What is needed for a turbo conversion coops? as a novice i'm asking what needs to be strengthened i guess... pistons. etc..
Well, you can just boost it up np, but for proper power and reliability low compression forged pistons, rods and ARP bolts are a good idea with a decent head gasket too. Coops went through more than one HG I seem to remember! You will also need a different MAP sensor, and at the minimum a 'log' manifold for the turbo to bolt onto, and a different downpipe. After that, an intercooler is a good idea with additional pipework for the setup. Car would need to be mapped as well, or get an off the shelf low or high boost ECU.
16v_paddy
14-09-2013, 16:25
or get an off the shelf low or high boost ECU.
You mean like Justin did? :lol:
low boost, nothing, that's upto about 9psi an 220 odd bhp, 180 lb/ft
above that, pistons are advisable and after that no idea, tbh never actually tested anything to destruction so no idea.
but tbh, set of rods and pistons and your good for 500bhp +
ThRaXaIR
15-09-2013, 20:25
Ok thanks, i was just wondering. curiosity gets the best of us sometimes..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.