head cams and pulleys

[bbracer16valver]

needing a head for my f7r BE been running a standard 1.8 one

ideally after a ported polished big valve one still running dizzy setup with cams and pulleys included in one hit but thats HIT and MISS ino!

so either that or any of them parts singular

NEEDS TO BE PROVEN WORK! NOT JUS BUZZED ROUND THE INLETS WITH YA MATES DREMMEL ;)

thanks

Ash

bbracer16valver@gmail.com

[lkcio86]

If you get stuck i have a set of standard F7R cams and pulleys, but no head im afraid

[northy]

http://williamsclio.co.uk/forum/showthread.php?42717-Renault-Clio-Williams-16v-Hybrid-F7R-Engine-Gearbox-ECU-all-Ancilleries

[bbracer16valver]

im already using a set of willy cams

and im not looking to spend nearly £2k on what i basically already got :/

and dont want kents ;)

[northy]

U keep on looking then!

[bbracer16valver]

i will don't worry, no need for the hostilities!!!!!!!!!!!

[cliorod]

Depends on how much you want to spend,I have a head with megane 33 mm valves in, ported & polished by FLETCHER RACING SERVICES,(who has forgotten more than most people know about Clio's,and prepares Tony Hart's championship winning sprint & Hill-climb cars.)
It has Columbi - Bariana rc 16 103 282 billet cams (£800 plus vat),solid lifters (were £16 plus vat,when I got them)Cosworth valve caps and springs,balanced chamber capacity,no verniers though..I used these on my engine.
Could be for sale if the right offer was made :winkey:

[bbracer16valver]

what kind of offer you talking? talk to me! :D are there pulleys as well? dead interested

as all im looking for is a head with cams and pulleys already in, or one off engine freshly done ready to go straight on mine

and i want good kit! no kents no pipers

[zmaster2k]

What's wrong with Kent and piper?

[ratboyvalver]

nout wrong with pipers or kents, the old nana engine which runs kents made good power, zmaster also runs kents his made good power, my old hybrid engine ran pipers, i now run catcams but still nothing wrong with kent cams or pipers

[bbracer16valver]

ive heard bad things about them i no people that run them but i dont want to personally :)

[northy]

i would put that down to bad fitment more than bad products!!!

[cliorod]

Hi.
It has no verniers and is currently stripped,and wants re-assembling.I keep looking for a set set of used verniers,but none about at the moment.

[zmaster2k]

Kent pullies failed iirc, I use pipers.

Cams are cams

[16v_paddy]

Kent pullies failed iirc, I use pipers.

Cams are cams

Was the old design of kent pullies that had problems & they got redesigned iirc

[bass_direct]

Yea I've had the new design Kents before and they were fine

[bbracer16valver]

any info on the old and new ones ? like a pic of each and which to avoid like the plague

[Wobba]

Well, I guess the man wants CatCams :)

Piper are good too.

I heard some Kents wear too fast. Probably Internet bullshit tho.

I have some 225 Catcams, trouble is I need to have a seized bolt drilled out first.

I have a standard willy head here too somewhere.

The headwork is what is going to cost you. Could get a bigger valve Meg head and have it worked for gay-boy dizzy use maybe and stick cams in? Have to keep eyes peeled for bargains like this mate...full head and cams etc I mean.

[bbracer16valver]

i found a head i want but kiddy wants more than i wana give so still in talks

and whas about the catcams? my dads a fabricator so bolt removal wouldnt be to hard,, by question is is how has a bolt got stuck in a cam? the end one snap?

[16v_paddy]

by question is is how has a bolt got stuck in a cam? the end one snap?

Scamming incompetent trader cross threading the bolt & using an air gun to keep winding it in

[bbracer16valver]

sounds dodgy :lol:

[16v_paddy]

Aye, Proper Dodgy :winkey: