View Full Version : Tailgate
KingStromba
27-02-2005, 22:00
How much for a new tailgate from Reno, and what do you get?
Also, what is the difference between phase 1 and 2. I know their is no hole for the washer and the badges are different. Anything else?
The badges on the phase 2 have locating holes in the tailgate. Also the washer jet as you said. Other than that no differences.
Think its just the bare metalwork you get.
KingStromba
27-02-2005, 22:21
I have available to me:
Original taligate of 0200 (damaged reversing into a pillar)
449 phase 1 tailgate with loads of minor marks and scuffs
449 phase 2 tailgate (mint)
Car is going into body shop on 7th march.
Do i repair and respray original (maybe costly with large dent). Respray and respray 449 with minor scuffs and dents? Or get a hole put in the phase 2 for the washer and remove the badge holes?
KingStromba
27-02-2005, 22:29
http://cgi.nickywitts.plus.com/uploads/dent.jpg
This is the dent on original tailgate
Original taligate of 0200 (damaged reversing into a pillar)
Be cheaper to get a new tailgate.
449 phase 1 tailgate with loads of minor marks and scuffs
Prob best compromise.
449 phase 2 tailgate (mint)
Cutting hole and filling holes would again as original tailgate be labour intensive.
This would all depend on how much a new one would cost, against prep needed ready to spray above tailgates.
Id get the good ph 1 tailgate cleaned up and resprayed myself.
Keep 0200 as a project if you find a decent repair shop.
KingStromba
27-02-2005, 22:58
Or do i buy a new tailgate and get it sprayed?
Personally i'd get a new one.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.