182 disks

[Allan]

Do 182 / 172 disks mount stright on the williams hubs??
If they do, can you mount a 182 caliper onto a williams ??
Or are the hub mounting points totaly different requiring new brackets etc.

[Coops]

not sure on the calipers etc but the discs are a straight bolt on, I use them on valver hubs with my hispec calipers

[Allan]

coops you dont happen to have an old disk laying about do you ? :D

[Jamie.]

Pretty sure foxy used to have 172 brakes on his valves so I reckon most bits bolt straight on or easily adaptable.

[Coops]

I don't Allan mate no, I chucked the old ones and they were 'hispec' rip off ones which iirc were 285mm, 172's are 283mm I think so slightly different!lol! :D

[Allan]

i shall have to do some investigation ;D

[-jo-]

be carefull !

Williams bolt distance = 54 mm
172= 58 mm
182= 58 mm
Megane 1 (1.6 & 2.0)= 58 mm

182 CUP = 60 mm + more splines on driveshaft
172 ragnotti (euro)= 60 mm + more splines on the driveshaft

[-jo-]

and something else...never shared this info excuatly:


http://i224.photobucket.com/albums/dd11/joke222/APclioV6%20en%20grN%20fusee/Afbeelding054.jpg
http://i224.photobucket.com/albums/dd11/joke222/APclioV6%20en%20grN%20fusee/Afbeelding053.jpg
http://i224.photobucket.com/albums/dd11/joke222/APclioV6%20en%20grN%20fusee/Afbeelding050.jpg
http://i224.photobucket.com/albums/dd11/joke222/APclioV6%20en%20grN%20fusee/Afbeelding048.jpg
http://i224.photobucket.com/albums/dd11/joke222/APclioV6%20en%20grN%20fusee/Afbeelding047.jpg
http://i224.photobucket.com/albums/dd11/joke222/APclioV6%20en%20grN%20fusee/Afbeelding046.jpg
http://i224.photobucket.com/albums/dd11/joke222/APclioV6%20en%20grN%20fusee/Afbeelding045.jpg

182 cup/ 172 ragnotti hub + Clio V6 calipers = straith fit (NO BRACKETS)

[Allan]

quite interesting

Just been diggi through the garage and found two full sets of wilwod calipers a set of superlites and some dynalites :D

So might just template them up in wood and get the house mate to machine some brackets up :D