View Full Version : Sequential fuel injection
cliokongen
01-05-2012, 00:14
Would like to change my injection set up - by using sequential injection.
Just like on the Megane Coupe.
It has some strange looking verniers and a sensor built into the cam carrier.
I need to know "where the cam is"
As i am using Cat Cams verniers how can i make a system like this?
M
volymmannen
02-05-2012, 23:43
Would like to change my injection set up - by using sequential injection.
Just like on the Megane Coupe.
It has some strange looking verniers and a sensor built into the cam carrier.
I need to know "where the cam is"
As i am using Cat Cams verniers how can i make a system like this?
M
Borde funka med en iduktiv givare till en kamnock tex
icenutter
03-05-2012, 09:25
That's exactly what I thought too.
Would like to change my injection set up - by using sequential injection.
Just like on the Megane Coupe.
It has some strange looking verniers and a sensor built into the cam carrier.
I need to know "where the cam is"
As i am using Cat Cams verniers how can i make a system like this?
M
Borde funka med en iduktiv givare till en kamnock tex
in english pls :D
volymmannen
06-05-2012, 21:31
Would like to change my injection set up - by using sequential injection.
Just like on the Megane Coupe.
It has some strange looking verniers and a sensor built into the cam carrier.
I need to know "where the cam is"
As i am using Cat Cams verniers how can i make a system like this?
M
Borde funka med en iduktiv givare till en kamnock tex
in english pls :D
should work with megane inductiv sensor against a camlobe :D
Would like to change my injection set up - by using sequential injection.
Just like on the Megane Coupe.
It has some strange looking verniers and a sensor built into the cam carrier.
I need to know "where the cam is"
As i am using Cat Cams verniers how can i make a system like this?
M
Borde funka med en iduktiv givare till en kamnock tex
in english pls :D
should work with megane inductiv sensor against a camlobe :D
still the sensor works with the cam gear iir. so if he"s running a catcam varnier pulley will the sensor pickup the accurate cam possition?
volymmannen
07-05-2012, 16:39
Would like to change my injection set up - by using sequential injection.
Just like on the Megane Coupe.
It has some strange looking verniers and a sensor built into the cam carrier.
I need to know "where the cam is"
As i am using Cat Cams verniers how can i make a system like this?
M
Borde funka med en iduktiv givare till en kamnock tex
in english pls :D
should work with megane inductiv sensor against a camlobe :D
still the sensor works with the cam gear iir. so if he"s running a catcam varnier pulley will the sensor pickup the accurate cam possition?
Yes if you place it against a camlobe instead of cam pulley, or instead of a distributor. on Laguna I with F3R running dual coils it has a cam sensor instead of a distributor.
cliokongen
07-05-2012, 20:57
So...
Will the Laguna F3R cam sensor fit on the F7R? (on the exhaust cam instead of the distributor)
Interesting... :)
M
the F7R from the megane got it buildin the camcarrie iir. if yes cant that one be used with the catcam camgears?
cliokongen
07-05-2012, 21:36
the F7R from the megane got it buildin the camcarrie iir. if yes cant that one be used with the catcam camgears?
It does yes - but the Megane F7R verniers are quite special - designed to work with the cam sensor.
Maybe I could strip a distributor - put a sort of toothed gear on the end and mate it with a sensor.... (would look like rubbish though)
volymmannen
13-05-2012, 17:10
So...
Will the Laguna F3R cam sensor fit on the F7R? (on the exhaust cam instead of the distributor)
Interesting... :)
M
Dont know,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.