View Full Version : Oil temp/level sensor price
robi1000
08-06-2011, 13:57
What's the price for one of these?
It's oil level and temp sensor.
http://img288.imageshack.us/img288/2345/dscn07767qw.jpg
Is this Renault only item or can I get it elsewhere?
robi1000
09-06-2011, 23:13
Anyone?
I can't remember what one you need. Willy spec I think for OEM loom plug? Can't remember what one I used with 714 block.
robi1000
14-06-2011, 15:11
I hope 714 uses the same sensor as other F7R blocks. BTW, Stealers sell it for around 73€. EXPENSIVE!!!
what size nut is on the end of it ? Just out of interest ????
Dude, I may have one somewhere. Will look.
I think I had to use the one from my Williams due the the plug, or different sump...one or the other, or both.
robi1000
14-06-2011, 23:13
F7R 714 has different sensor. Part number is 82 00 670 520.
I've got a brand new one in my spare bottom end :)
Valver oil level sensor (77 00 826 667) = £56.96 (back order)
Presumably same for Williams but not checked part numbers.
Andy
Ah, just read above posts, maybe not same part then. Plus price was excluding VAT......best off getting 2nd hand as a bit bloody pricey!
robi1000
08-03-2012, 12:06
Hey!
I got this sensor at the scrappy yesterday, but it seems a bit different then the one in the first pic:
sensor I got yesterday:
http://s7.mojalbum.com/10833367_10871809_19494442/williams-razno/19494442.jpg
I found this pic on the net, but it's supposed to be the right sensor
http://img288.imageshack.us/img288/2345/dscn07767qw.jpg
My question is if I can use this new sensor and to what it was originally fitted (guy at the scrappy gave it to me, so I didn't remove it from the engine). I think there might be a problem, because if I'm not mistaken there are 3 wires coming out of the original and only two pins on the one I have. So does this mean it only has oil level and no temp sensor?
MatBrown
09-03-2012, 02:29
That looks like an R19 one.
Probably be fine, just solder wires on.
robi1000
09-03-2012, 15:21
Ah, I'll just try to source a valver one. Thanks for the help!
I'll check my spares box, if i have one you can have it for the price of postage.
robi1000
10-03-2012, 11:55
That would be great!
cliokongen
10-03-2012, 12:39
Hey!
I got this sensor at the scrappy yesterday, but it seems a bit different then the one in the first pic:
sensor I got yesterday:
http://s7.mojalbum.com/10833367_10871809_19494442/williams-razno/19494442.jpg
I found this pic on the net, but it's supposed to be the right sensor
http://img288.imageshack.us/img288/2345/dscn07767qw.jpg
My question is if I can use this new sensor and to what it was originally fitted (guy at the scrappy gave it to me, so I didn't remove it from the engine). I think there might be a problem, because if I'm not mistaken there are 3 wires coming out of the original and only two pins on the one I have. So does this mean it only has oil level and no temp sensor?
If the lenght and the placement of the holes (where you can see the thin wires) are in the same place - it should be the same...
robi1000
10-03-2012, 12:56
Yeah, but mine has 2 pins and the one in the pic has 3?
cliokongen
10-03-2012, 13:15
hmmm..... :?
I have one from my Williams 2 block, fully working etc for sale. Same as the one pictured a few posts above. Pm if it's any use.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.