PDA

View Full Version : CV Joint



LEIGH-ANNE
09-09-2010, 12:54
Outer cv joint and gaitor? Drivers side

poss a shaft too

wilky19
09-09-2010, 15:27
iirc some people have used these ones before and said they were all right

http://cgi.ebay.co.uk/RENAULT-CLIO-OUTER-CV-JOINT-1991-1998-1-8-1-9-2-0-NEW-/130419545251?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e5d9c54a3

zmaster2k
09-09-2010, 17:13
I used that one and it didn't fit :-(

midge
10-09-2010, 21:18
I have a brand new one £30 or i can give you a drive shaft with a good joint for £20 (i will cut it down to save post, the inner joint is **** and its valver anyway)

schakal
10-09-2010, 23:24
changing the cv joint is a bit of a task to be honest ,plus if its the
actual tullip that is fokkered you will be pissing against the wind .

i would get a driveshaft thats known to work tbqfhwua .

jay s
12-09-2010, 13:59
cant say i've ever had a problem changing the cv on the shafts and i've used a few of the ones in that link now for various shafts and they have been perfect. as laine says its just a case of pulling the circlip apart while whacking the cv off with a mini sledge hammer, works for me every time :D