Justin..
16-08-2010, 00:55
Yellow powder coated cam cover and spark plug tray, its a little bit tatty but looks ok when cleaned up £25+post
http://i14.photobucket.com/albums/a341/justin_2k5/15082010174.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010175.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010176.jpg
Yellow HT leads full set £20 posted
http://i14.photobucket.com/albums/a341/justin_2k5/15082010180.jpg
Silver poweder coated ALT/PAS brackets, Top engine mount, Pulley cover, £50 posted the lot
Tensioner works fine, allen key not rounded or seized
http://i14.photobucket.com/albums/a341/justin_2k5/15082010179.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010178.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010177.jpg
Powder coated silver inlet manifold, drilled and installed with WON direct port nitrous jets, 50 bhp solonoids, some tubing, 11lb bottle (empty) NO ELECTRICS £150+ £50 post (collection preffered due to size and components)
2.5k mile old OMP paddle clutch and pressure plate. Loads of life yet £70 +post
http://i14.photobucket.com/albums/a341/justin_2k5/15082010184.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010183.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/04082010159.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010182.jpg
Cast turbo manifold 300 miles £60 - delivered
http://i14.photobucket.com/albums/a341/justin_2k5/15082010181.jpg
FSE fuel pressure regulator/power boost valve set to 3.5 bar with pressure guage, hoses and fittings - £35 posted
Throttle body & inlet PTFE gaskets, used, dirty but fully reuasable £17.50 posted
Throttle body with good TPS (never messed with, no broken wires) £20 posted
19 row oil cooler with hoses and NON thermostatic take off plate £50 posted
http://i14.photobucket.com/albums/a341/justin_2k5/15082010174.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010175.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010176.jpg
Yellow HT leads full set £20 posted
http://i14.photobucket.com/albums/a341/justin_2k5/15082010180.jpg
Silver poweder coated ALT/PAS brackets, Top engine mount, Pulley cover, £50 posted the lot
Tensioner works fine, allen key not rounded or seized
http://i14.photobucket.com/albums/a341/justin_2k5/15082010179.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010178.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010177.jpg
Powder coated silver inlet manifold, drilled and installed with WON direct port nitrous jets, 50 bhp solonoids, some tubing, 11lb bottle (empty) NO ELECTRICS £150+ £50 post (collection preffered due to size and components)
2.5k mile old OMP paddle clutch and pressure plate. Loads of life yet £70 +post
http://i14.photobucket.com/albums/a341/justin_2k5/15082010184.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010183.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/04082010159.jpg
http://i14.photobucket.com/albums/a341/justin_2k5/15082010182.jpg
Cast turbo manifold 300 miles £60 - delivered
http://i14.photobucket.com/albums/a341/justin_2k5/15082010181.jpg
FSE fuel pressure regulator/power boost valve set to 3.5 bar with pressure guage, hoses and fittings - £35 posted
Throttle body & inlet PTFE gaskets, used, dirty but fully reuasable £17.50 posted
Throttle body with good TPS (never messed with, no broken wires) £20 posted
19 row oil cooler with hoses and NON thermostatic take off plate £50 posted