flywheel

[dhay14]

does the megane f7r engine have a 60 tooth pattern flywheel?

[Laine_16v]

It does :)

[dhay14]

nise... tnx mate

[dhay14]

and does it use the same clutch and pressure plate as the willie fly?

[Laine_16v]

It doesnt :(

[volymmannen]

225mm vs 200mm

[volymmannen]

225mm vs 200mm
wrong 215mm

[dhay14]

i assume the megane item is the 215mm?
are there any other flywheels that does have a 60tooth pattern where the williams clutch does fit? 172 or a volvo item?

[Coops]

nope, need to go stand alone to run a 215mm clutch

[Coops]

although it is technically possible to retap the flywheel to accept a 215mm cover, the lagunas used same size flywheel but a different design on the clutch cover plate to accept the 215mm clutch. but the bolt holes are in a different place. so need to retap flywheel and balance it all back up etc

[dhay14]

that is the whole idea coops. im planning on going for a aftermarket ecu and need a 60 tooth patern fly. ive heard that the 16v and williams have a 2-32 pattern orso and that you can machine the double tooth patern so the aftermarket ecu's can be used..

can anybody elaborate on this?

[Laine_16v]

But why not just use the meganne flywheel though? The larger clutch surface is definately an advantage.

[Coops]

ah right in that case yes can use 172/182 flywheel yeah, no probs as thats what ronee and gaz run on their stand alone setups etc :D

[dhay14]

i have no problem using neither clutches but the clutch kit i run now is almost new. so if i can use it till it wears out befor investing in a new set of performance clutch kit .

it would have been great if the willie clutch kit fitted right away..

are the 172,182,megane,laguna fly all identical?

[volymmannen]

I think you can use a megane fly and make some new holes for a 200mm clutch.