View Full Version : clutch
canelloni
24-04-2010, 08:38
was just wondering ther is any way or adjusting the clutch pedal had a new clutch in the car but the pedal has to almost be fully down to disengage would prefere it higher if possible :roll:
MatBrown
24-04-2010, 10:12
Reset the ratchet mechanism.
Mat.
canelloni
24-04-2010, 20:40
? help ?
undo cable from gearbox end and remove green pedal stop. put pedal to floor then reconnect box end, press pedal down to floor and whilst still holding pedal down refit pedal stop
let pedal back up gently to stop, remove pressure completely
then pump it a few times gently to settle it
this is how i usually get the mechanism to take well
canelloni
24-04-2010, 20:57
many thanks coops
I've just replaced my cable and tryed this method myself, before i tryed it the clutch was too tight and wouldnt select a gear, even with th clutch fully in, now the biting point is too high and its obviously not out fully. any help please? :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.