View Full Version : alternator, quick advice needed
im doing it myself!!! :D :shock: but like a plum i didnt take any notice of where the thick balck wire goes :? :shock: is it B+ or B-
cheers
im doing it myself!!! :D :shock: but like a plum i didnt take any notice of where the thick balck wire goes :? :shock: is it B+ or B-
cheers
the fitments at the end of wires will not allow you to fit it
over the wrong threaded stud on the alt. body anyways .
one is larger than the other .
on the other hand black wire 99.9% of the time is a an earth
wire making it B- in your case .
seamen-sempleeesss :D :D
can i find a 7mm allen key for the pulley tensioner!!! can i fook!!!
don't need to touch tensioner for alternator swap, just undo top bolt on alternator, pop it back against block and prise belt off. :wink: refit the same way
can i find a 7mm allen key for the pulley tensioner!!! can i fook!!!
I've got one you can borrow!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.