View Full Version : Devil exhaust manifold
Plus any part specific bits needed.
Not interested in Supercrack ones, thanks.
Wobba.
The exhausts break due to no support at the manifold to block end.
When supported they are fine. Mine has been on a good 5 / 6 years now with no trouble.
The exhausts break due to no support at the manifold to block end.
When supported they are fine. Mine has been on a good 5 / 6 years now with no trouble.
Thanks for the info. How is yours supported? Extra bracket?
YES, in the exact same place as the standard one mounts too.
The exhausts break due to no support at the manifold to block end.
When supported they are fine. Mine has been on a good 5 / 6 years now with no trouble.
Agree, its sloppy engine mounts that cause the cracking..
YES, in the exact same place as the standard one mounts too.
I am being a bit ignorant here. I know of the standard manifold mounting points but they don't look like they match up in any way to the Supersprint ones:
Supersprint mani and d/p:
http://i2.photobucket.com/albums/y29/arj256/Williams%20Parts%20For%20Sale/SupersprintExhaustManifold.jpg
http://i2.photobucket.com/albums/y29/arj256/Williams%20Parts%20For%20Sale/SupersprintDownpipeWithFlexi.jpg
OE:
http://i247.photobucket.com/albums/gg143/DMJ2O/DSC00551.jpg
How is the bracketry the same? Cant see a mount for the SS one that would match...
i made my own up mate, looks easy to do on a supersprint.
I used 5mm plate bent and cut to shape.
I have a Prowler exhaust so mine mounts differantly.
I got this one from Italy.
I had a supersprint one - but i sold it on to Richy. TBH the supersprint ones are better but the Prowler / Powerful ones are easier to support due to the design of clamps....
This is the one on my williams 3 when it was new....ive tried to show the hanger i made
http://i4.photobucket.com/albums/y107/northy_com/DSCN0893-1.jpg
http://i4.photobucket.com/albums/y107/northy_com/DSCN0894.jpg
http://i4.photobucket.com/albums/y107/northy_com/Dscn0898.jpg
http://i4.photobucket.com/albums/y107/northy_com/DSCN0899.jpg
Wow! That's impressive Northy.
Looks nice down there. I think I could use the same method and create a decent bracket to the bracket on the SS, the bit that clamps the d/p to the mani normally, or even better, two of the clamp points, use a different nut and bolt, job done!
the picture is a good 4 years old mate, it doesnt look like that no more.
Do u have a supersprint pipe yet ? As i would recomend a powerfull / prower one from italy !
the picture is a good 4 years old mate, it doesnt look like that no more.
Do u have a supersprint pipe yet ? As i would recomend a powerfull / prower one from italy !
No I don't have one, though the mid section is an unsilenced Supersprint :P
I'll go look them up!
:( Google says no can find Prowler.
http://cgi.ebay.fr/Collecteur-Inox-Secretauto-Renault-Clio-Williams-1L8-16_W0QQitemZ220513669517QQcmdZViewItemQQptZFR_JG_A uto_Tuning?hash=item3357a3918d
This is identical to the one i have
http://cgi.ebay.it/Auto-Ricambi-e-Accessori___Marmitte-collettori-scarico-Renault-clio-1-8-v-WILLIAMS_W0QQitemZ250523877963QQddiZ7429QQddnZAuto Q3aQ20RicambiQ20eQ20AccessoriQQcmdZViewItemQQptZRi cambi_automobili?hash=item3a5463024b
and the last one i can quickly find
http://cgi.ebay.it/Auto-Ricambi-e-Accessori___MARMITTA-COLLETTORE-INOX-RENAULT-CLIO-1-4_W0QQitemZ120525816514QQddiZ7429QQddnZAutoQ3aQ20R icambiQ20eQ20AccessoriQQcmdZViewItemQQptZRicambi_a utomobili?hash=item1c0fe602c2
:( Google says no can find Prowler.
They didnt do many mate, then they changed their name to 'powerful'
ktec did sell mine when they first came out. But mine never fitted right and i had to have a part remade longer.
Stick with a supersprint mate
Awesome, cheers! Should have looked on Ebay Italy :(
16v_paddy
23-06-2014, 14:02
Thread bump, I need a better manifold as supersprint aint good enough for me now
cliokongen
23-06-2014, 15:33
If you can source one, get the Megane Cup one (Mk.1 Megane that is)
Larger in primary and secondary pipe diameter than both the Supercrack and Devil.
It's a 4-1 type manifold....
You will need to modify the fitment to suit the Clio though....
Michael
always been tempted to try get hold of a spider manifold to cut up and make my own version.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.