View Full Version : cammed hybrid idle
done a little vid of the car at idle today, nothing to harsh as i didn't want to upset the neighbours ( i do that most mornings at 06:30am :lol: ) :D
http://www.youtube.com/watch?v=JqaFwyb_yfM
sounds sweet tbh .
are these set up with verniers or just banged on to standard pulleys ?
very nice! reminds of the beginning of this: http://www.youtube.com/watch?v=JTzlDnj54R8
:D :D
sounds sweet tbh .
are these set up with verniers or just banged on to standard pulleys ?
LOL, there set up on verniers but stan/nick hill mate :D
sounds sweet tbh .
are these set up with verniers or just banged on to standard pulleys ?
LOL, there set up on verniers but stan/nick hill mate :D
stan or nick hill ? they are different people iirc .
stan fitted and timed them to the eng with his dti gauge but nick had set the verniers from my old cams and we used the same adv/ret figures on these cams as i wanted it to be stableish at idle.
i am still in shock as to how you get 171 bhp with cams and all that
mods where as summeh runs 180bhp with decat ,induction and
a simple rolling roaded map :shock:
:?
LEIGH-ANNE
18-01-2010, 00:16
Thats not all that summeh has
Thats not all that summeh has
pics ,links ?
I drove Summehs car for about 10 days when he kindly lent me it out of his fleet of cars lol. It's a quick 'un for sure!
I think he has removed the nitrous now, but I think it has a bit more than aforementioned mods...not much though!
What's next Jay?
i am still in shock as to how you get 171 bhp with cams and all that
mods where as summeh runs 180bhp with decat ,induction and
a simple rolling roaded map :shock:
:?
simple different rolling road = very different figures. my old set up had milder cams and a remap yet ran 177bhp @ my local rolling road and i can guarantee you it hasn't lost any power , quite the opposite and gained a nice chunk. I'm off to the same rolling road next sat with cliosport to get a direct comparison with my old setup as it will be the same rolling road i ran the 177 on and they should have my graph saved so i can get a print out of old vs new. as a note cliolords out itb 2.0ltr high comp build ( the 1st one ) ran 181bhp at rstuning then went on to run a 13.3 @ pod the next day. think he then got it rr else where and made 210+
Thats not all that summeh has
ohh wait ...
GUNNER180 - Map which gives me 180bhp/150lb/ft when rolling roaded at Hill Power RR (have proof), with just breathing mods, i.e. filter, supersprint manifold, decat, and exhaust. 7000 limiter. £40 posted. Very good feedback from this!!
very nice! reminds of the beginning of this: http://www.youtube.com/watch?v=JTzlDnj54R8
:D :D
haha thats gaztwo's nana idle
i sure summeh also has headwork but is running 33 mm inlets, or was that on his old cup car?
ThRaXaIR
18-01-2010, 19:41
very nice! reminds of the beginning of this: http://www.youtube.com/watch?v=JTzlDnj54R8
:D :D
thats really cool, we should make a 2010 version this year as the people on this site have changed alot and its positive advertising for the site!
i sure summeh also has headwork but is running 33 mm inlets, or was that on his old cup car?
yeah he has headwork on his williams, AWT did it
pics ,links ?
http://www.williamsclio.co.uk/forum/viewtopic.php?t=15069
says he has headwork in there
done a little vid of the car at idle today, nothing to harsh as i didn't want to upset the neighbours ( i do that most mornings at 06:30am :lol: ) :D
http://www.youtube.com/watch?v=JqaFwyb_yfM
nice one mate!
here is mine with catcams, and some headwork ;)
http://www.indavideo.hu/video/williams_clio_200le/
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.