best cams for my engine (jenvey itb's...)

[energy_god]

Hello,

I have a F7R 710 Megane engine with factory bottom end, head work, devil cup 4in1 manifold, 63mm exhaust, jenvey 45mm itbs, vernier pulleys

What is the best cams for me? how much powerhorse and torque can I expect?

Thank you.

[Laine_16v]

Your standard pistons are limiting you, as higher lift cams need cutouts in the pistons for them to work.

I'd say catcam 5502213's are the best for your application, about as wild as you can go on stock valvetrain components.

On your setup expect gains of 15 + bhp/torque over standard parts.

[sideways danny]

agree, 213s are great cams, they even work well with higher compression pistons.

[stan]

You can definately go wilder on stock pistons and valve gear.

What are you using the car for?

[energy_god]

I'm using the car for drag race so I need max power but with stock bottom end



You can definately go wilder on stock pistons and valve gear.

What are you using the car for?

[energy_god]

What do you think about this one from pipercams?

R16VBP285H

2500-7300rpm
276 deg 276 deg
10.87mm/10.87mm
106 deg/106 deg
2.18mm/2.18mm