View Full Version : Wheel Spacers
darkfibre
09-08-2009, 10:36
Can anyone recommend a preferred width of a pair of hubcentric spacers for the rear of my Willy? Will 10mm either side be enough to fill out the rear arches (similar to the look of the widetrack at the front)?
i don't think your going to find hubcentric spacers which are 10mm, as they need to be bolted to the existing hubs, you could have someone machine a flat 10mm tick spacer and use long wheel bolts or do a stud conversion.
I did reply to you pm about some of this too.
i run a ktec flat 10mm per side spacer kit on the rear, no wobbles or anything, bob on, was about 50 quid inc longer bolts iirc
darkfibre
12-08-2009, 20:04
Food for thought, cheers guys.
ThRaXaIR
12-08-2009, 21:29
where can i get some extended bolts to allow for a 10mm spacer from?
cheers
where can i get some extended bolts to allow for a 10mm spacer from?
cheers
extended bolt shop :idea: :idea:
ebay mate :D
ebay, can spec any length pretty much if you find a shop
or ktec do 35mm for the rears, spot on
i got mine from larkspeed,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.