FAST ROAD CAMS

[thaijedi]

Ok i really want some fast road cams but would like some feed back on weather to go with Prima racing or K-Tec.

its for my williams2, ive got a gunner chip, K-Tec mani, full SS and K'N so the engine is ready.

[flash]

do away with the k and n and stick your std airbox back on with an itg filter

[thaijedi]

got no air box.. made a high presure of cold air around the K'N so all good

[JoaoC]

I've got some k-tec stage1 cams on my valver, which are in fact Pipercams BP270H.

Along with headwork, Supersprint manifold and a remap I had gains of aprox. 20hp.
Engine is still perfectly usable in lower revs, but it's noticeable that it likes to rev a lot more than before.

I would recommend them to anyone using their car as a daily-driver.

Hope it helps :)

[thaijedi]

sweet thanks m8

[MAXIBOY]

Ok i really want some fast road cams but would like some feed back on weather to go with Prima racing or K-Tec.

its for my williams2, ive got a gunner chip, K-Tec mani, full SS and K'N so the engine is ready.

go with stan at apd and get cat cams fitted

[fasterthanjesus]

a big +1 for stan at apd. and the same for cat cams

[Neepdocker]

Why do you want cams. I thought the "Gunner Chip" on it's own produced approx 240 bhp. :wink: :wink:

[thaijedi]

no the chip alone wont give you that power you need a lot more than a chip upgrade to get 240bhp from 2.0 L N/A

[hamloin]

i used kent to re profile my standard cams and they were fantastic. from what iv seen kents cams seem a little more agressive than others and iv herd nothing good at all about piper. with a home ported head i gained 30bhp on a 1.8 valver.

[schakal]

i used kent to re profile my standard cams and they were fantastic. from what iv seen kents cams seem a little more agressive than others and iv herd nothing good at all about piper. with a home ported head i gained 30bhp on a 1.8 valver.

did you use verniers or standard pullies on them ?