PDA

View Full Version : Megane fly 60-2


volymmannen
26-06-2009, 22:33
i have been told that megane has a 60-2 fly, and this is a picture of my F7r megane engine,and this is not 60-2..

http://i55.photobucket.com/albums/g159/volymmannen/DSC00344.jpg

http://i55.photobucket.com/albums/g159/volymmannen/DSC00346.jpg
sideways danny
26-06-2009, 23:57
it's a slightly funny pattern, but essentially and for the purpose of any standalone ECU, yes it is 60-2
Evogone
27-06-2009, 08:31
it's a slightly funny pattern, but essentially and for the purpose of any standalone ECU, yes it is 60-2

Can you run this flywheel with a std ECU ? I have a Williams head and Megan BE and std ECU would i have the Williams Flywheel ?
Coops
27-06-2009, 11:03
yes you need the williams flywheel iirc
Laine_16v
27-06-2009, 11:14
Williams ECU will NOT recognise that trigger pattern.
volymmannen
28-06-2009, 14:51
it's a slightly funny pattern, but essentially and for the purpose of any standalone ECU, yes it is 60-2

Ok so it will work with a VEMS ECU. :D
sideways danny
28-06-2009, 15:03
does anything work with VEMS?
speed
28-06-2009, 17:12
does anything work with VEMS?

lol :D
schakal
28-06-2009, 17:58
does anything work with VEMS?

i am running my washer leds on it ,never had a problem.
Laine_16v
29-06-2009, 19:10
it's a slightly funny pattern, but essentially and for the purpose of any standalone ECU, yes it is 60-2

Ok so it will work with a VEMS ECU. :D

Yes, i am running VEMS with Meganne flywheel :)
Laine_16v
29-06-2009, 19:11
does anything work with VEMS?

My VEMS works flawlessly?
volymmannen
01-07-2009, 01:54
does anything work with VEMS?
Better than omex
schakal
01-07-2009, 07:39
does anything work with VEMS?

My VEMS works flawlessly?


give it sometime :D
Evogone
01-07-2009, 09:59
does anything work with VEMS?
Better than omex

Based on what.............
volymmannen
01-07-2009, 13:19
does anything work with VEMS?
Better than omex

Based on what.............


I wrote that because i have seen a couple people that have used omex but changed to Vems because they didn't like it. A friend of mine changed and says that its much easier , you have bad support and knowledge on omex in sweden but not with Vems.
I am sure that omex works too, but its easier for me to use VEMS + it can handle more than an omex for less money..

A friend has done many Vems installations and mapping and i have talked to the man who has developed Vems so i stick to Vems regardless what people says..
volymmannen
01-07-2009, 13:21
it's a slightly funny pattern, but essentially and for the purpose of any standalone ECU, yes it is 60-2

Ok so it will work with a VEMS ECU. :D

Yes, i am running VEMS with Meganne flywheel :)

:bananawave: :driving:
sideways danny
01-07-2009, 14:21
does anything work with VEMS?
Better than omex


hahahahahahahahahahahahahahahahah

it's megasquirt FFS
Wobba
02-07-2009, 09:35
does anything work with VEMS?

i am running my washer leds on it ,never had a problem.

lol
Wobba
02-07-2009, 09:35
Megane flywheel wont work on std ECU iirc.
volymmannen
02-07-2009, 16:01
does anything work with VEMS?
Better than omex


hahahahahahahahahahahahahahahahah

it's megasquirt FFS

No its not,v1 was based on MS, V3 is completely different not a single component is MS.. Cant compare it with MS ..
The software is the same with some minor changes but that has nothing to do with function
Laine_16v
02-07-2009, 16:50
FYI volymmannen, this is the Meganne flywheel setting on VEMS.
volymmannen
03-07-2009, 16:53
:bowdown: