Coggi
24-06-2009, 09:41
Please make any offer on these parts! They all must go or they will go to the scrap yard in the sky!!!!
Open to offers on all these parts, either PM me or ring me or text me on 07792920716 or email me on mattcoggins@hotmail.com
Some of the parts are big (Subframes gearboxes ect so not interested in posting.... Parts located in Wakefield West Yorkshire near Leeds
So here it goes, selling these as I had them on Clio 16valver but no offers! Ive no longer got a clio so need to get these bits moved. Dont make me take them to the tip!!!
Williams bottom end, the guy said it was rebuilt before i got and it looks pretty new with new core plugs and stuff. To be honest it looks pretty new and just run in. He also said that it had high compression pistons but im not sure.
Williams bottom end, the guy said it was rebuilt before i got and it looks pretty new with new core plugs and stuff. To be honest it looks pretty new and just run in. He also said that it had high compression pistons but im not sure. Im happy to send pictures!
http://i211.photobucket.com/albums/bb226/coggi26/P3260277.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260281.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260278.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260280.jpg
The tag says that its a 1.8 but it got the proper 92.1mm stroke (I think its 92.1 i can check and take a picture withe a ruler down there if you want)
Williams head, with standard cams, there is a small bit of the cam missing at the end where i think you lock the cam into possition?
http://i211.photobucket.com/albums/bb226/coggi26/P3260276.jpg
Williams front subframe with both arms, roll bar and hubs. This frame is the black one at the back and it been through a wall or something but all the bits are there to wide track a car.... arms and stuff are strait!
http://i211.photobucket.com/albums/bb226/coggi26/P3260282.jpg
Williams front subframe with both arms, roll bar, hubs, discs and callipers will need sandblasting or wire brushing and a tin of hammerite but it is triple skinned.
http://i211.photobucket.com/albums/bb226/coggi26/P3260282.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260283.jpg
Williams drive shafts with good boots
http://i211.photobucket.com/albums/bb226/coggi26/P3260286-1.jpg
Rear beam complete with brakes apart from on rear calliper, its in the back of this picture, I also have a 16v rear beam
http://i211.photobucket.com/albums/bb226/coggi26/P3260282.jpg
Pair of CAT cams with pullies. I think they are rally ones.
http://i211.photobucket.com/albums/bb226/coggi26/P3270291.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270292.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270293.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270295.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270296.jpg
The cams say 55020 13 on the end of them....
ENGINE information
◄
5502213
►
INTAKE EXHAUST
clearance [cl] 0.00mm 0.00mm
duration [0.1mm+cl] 286° 278°
duration [1.0mm+cl] 246° 238°
valve lift [cl=0] 10.65mm 10.20mm REQUIRED PARTS
cam lift - -
peak angle 110° 110° followers: O.E.M.
timing [1.0mm+cl] 13/53° 49/ 9° retainers: O.E.M.
lift at TDC [cl=0] 2.50mm 1.95mm
They are a Rally & Cross cam, so Big Power!
I got this off Cat Cams website
Chipped 16valve ECU
http://i211.photobucket.com/albums/bb226/coggi26/P3270298.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270297.jpg
4 Pot brakes and MASSIVE discs. Hi Spec calipers, i think that they will fit under 17 inch wheels. They just need bolts to screw the disc to the disc bell.
http://i211.photobucket.com/albums/bb226/coggi26/P3270288-1.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270289.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270290.jpg
Front 16valve bumper in blue not bad nick but will need a paint
Rear 16 valve bumper in blue same again, may want a lick of paint to be mint
Pair of blue front wings and arch liners, please treat all panels as second hand and will have scratches on
Various doors in blue.
Clio 16 Valve bonnet with vent in
Blue bootlid
4 16 valve alloys, the five spoke ones with center caps, some are blue and some are green! No tyres
Renaukt 5 turbo gearbox, unknown condition but it looks ok!
http://i211.photobucket.com/albums/bb226/coggi26/P3260284-1.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260284.jpg
Clio 16valve front subframe complete with arms, anti rollbar, hubs, brakes and driveshafts.
16valve dash top
3 prima racing 17 inch alloys, one has a dint in it
http://i211.photobucket.com/albums/bb226/coggi26/P3260285.jpg
As I said, make any offer on these parts through either email, PM, 07792920716.
Cheers Matt
Cliorod has bought parts of me before and was happy with the coilovers he got a few months ago
Open to offers on all these parts, either PM me or ring me or text me on 07792920716 or email me on mattcoggins@hotmail.com
Some of the parts are big (Subframes gearboxes ect so not interested in posting.... Parts located in Wakefield West Yorkshire near Leeds
So here it goes, selling these as I had them on Clio 16valver but no offers! Ive no longer got a clio so need to get these bits moved. Dont make me take them to the tip!!!
Williams bottom end, the guy said it was rebuilt before i got and it looks pretty new with new core plugs and stuff. To be honest it looks pretty new and just run in. He also said that it had high compression pistons but im not sure.
Williams bottom end, the guy said it was rebuilt before i got and it looks pretty new with new core plugs and stuff. To be honest it looks pretty new and just run in. He also said that it had high compression pistons but im not sure. Im happy to send pictures!
http://i211.photobucket.com/albums/bb226/coggi26/P3260277.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260281.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260278.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260280.jpg
The tag says that its a 1.8 but it got the proper 92.1mm stroke (I think its 92.1 i can check and take a picture withe a ruler down there if you want)
Williams head, with standard cams, there is a small bit of the cam missing at the end where i think you lock the cam into possition?
http://i211.photobucket.com/albums/bb226/coggi26/P3260276.jpg
Williams front subframe with both arms, roll bar and hubs. This frame is the black one at the back and it been through a wall or something but all the bits are there to wide track a car.... arms and stuff are strait!
http://i211.photobucket.com/albums/bb226/coggi26/P3260282.jpg
Williams front subframe with both arms, roll bar, hubs, discs and callipers will need sandblasting or wire brushing and a tin of hammerite but it is triple skinned.
http://i211.photobucket.com/albums/bb226/coggi26/P3260282.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260283.jpg
Williams drive shafts with good boots
http://i211.photobucket.com/albums/bb226/coggi26/P3260286-1.jpg
Rear beam complete with brakes apart from on rear calliper, its in the back of this picture, I also have a 16v rear beam
http://i211.photobucket.com/albums/bb226/coggi26/P3260282.jpg
Pair of CAT cams with pullies. I think they are rally ones.
http://i211.photobucket.com/albums/bb226/coggi26/P3270291.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270292.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270293.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270295.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270296.jpg
The cams say 55020 13 on the end of them....
ENGINE information
◄
5502213
►
INTAKE EXHAUST
clearance [cl] 0.00mm 0.00mm
duration [0.1mm+cl] 286° 278°
duration [1.0mm+cl] 246° 238°
valve lift [cl=0] 10.65mm 10.20mm REQUIRED PARTS
cam lift - -
peak angle 110° 110° followers: O.E.M.
timing [1.0mm+cl] 13/53° 49/ 9° retainers: O.E.M.
lift at TDC [cl=0] 2.50mm 1.95mm
They are a Rally & Cross cam, so Big Power!
I got this off Cat Cams website
Chipped 16valve ECU
http://i211.photobucket.com/albums/bb226/coggi26/P3270298.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270297.jpg
4 Pot brakes and MASSIVE discs. Hi Spec calipers, i think that they will fit under 17 inch wheels. They just need bolts to screw the disc to the disc bell.
http://i211.photobucket.com/albums/bb226/coggi26/P3270288-1.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270289.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3270290.jpg
Front 16valve bumper in blue not bad nick but will need a paint
Rear 16 valve bumper in blue same again, may want a lick of paint to be mint
Pair of blue front wings and arch liners, please treat all panels as second hand and will have scratches on
Various doors in blue.
Clio 16 Valve bonnet with vent in
Blue bootlid
4 16 valve alloys, the five spoke ones with center caps, some are blue and some are green! No tyres
Renaukt 5 turbo gearbox, unknown condition but it looks ok!
http://i211.photobucket.com/albums/bb226/coggi26/P3260284-1.jpg
http://i211.photobucket.com/albums/bb226/coggi26/P3260284.jpg
Clio 16valve front subframe complete with arms, anti rollbar, hubs, brakes and driveshafts.
16valve dash top
3 prima racing 17 inch alloys, one has a dint in it
http://i211.photobucket.com/albums/bb226/coggi26/P3260285.jpg
As I said, make any offer on these parts through either email, PM, 07792920716.
Cheers Matt
Cliorod has bought parts of me before and was happy with the coilovers he got a few months ago