192 chip on ebay [Archive]

Wolfie

15-06-2009, 10:40

What does everybody think to the claims on ebay for a 192 hp williams chip with just breathing mods and no cam work etc! a bit optomistic?

The seller claims he has had it rolling roaded, hmmm..................Surely 42 hp over standard is stretching it a little! just like to know your thoughts!

Laine_16v

15-06-2009, 11:46

Absolute Horseshit

rob-legend

15-06-2009, 13:18

:imwithstupidup: :flogging:

:D

16v_paddy

15-06-2009, 13:26

:imwithstupidup: :flogging:

:D

got to be the 1st time I've ever seen the horse smiley used :lol: and very well used at that :P

queegan

15-06-2009, 14:19

dont get one its bullshit i have one on the ecu i just bought and the fuelling setup is wrong it runs like absoulte horse poo stay away from ebay chips ask summah hes the man in the know then ask kj16v to fit it hes the man for that!!

rob-legend

15-06-2009, 14:27

:imwithstupidup: :flogging:

:D

got to be the 1st time I've ever seen the horse smiley used :lol: and very well used at that :P

cheers paddy, learning from the master :P :wink:

Daz.

15-06-2009, 15:00

I heard you can chain them together abd add as many as you think you'll need.

Just got to be careful on the old gearbox - I'm going for 3 I reckon it'll be ok :D

Wolfie

15-06-2009, 15:01

Ha, thought as much....................No, its for my mate as I have already got a gunner 180. It was just a case of my mate saying how do you know its not a reasonable hp figure (192) if I have already bought the gunner and it is 180! Thing is I trust what you guys say and never thoroughly trust ebay, and hopefully after what has been posted on here my mate will doubt ebay too. thanks :D

schakal

15-06-2009, 15:07

i reckon it could add up to 50+bhp used in conjunction
with a twin vent setup like this one :D

http://i454.photobucket.com/albums/qq263/CraigieB16/FCS09/DSCN0326.jpg

summeh

16-06-2009, 00:56

192 just sounds like a figure plucked out of thin air to sound like 172, 182, 192, etc... 192bhp from a standard unworked engine sounds a bit optimistic to say the least.

cyberbeej

08-11-2009, 21:19

I stupidly bought one of these chips before i read this thread, fitted it just to see the differences, an improvement over the original and didn't think it was bad in any way, ie fuel holes etc, pulls all the way to 7500rpm.
KJ had a quick look at the coding and agreed that it would be ok to try, nothing silly in the coding.

Still don't think its gonna make 192 but made a difference, this is why i was trying to organise a rolling road day but little interest.
Got a gunner 180 on way and i'll try it and report on any dfferences.

FYI, running ITG filter and decat pipe only.
Contemplating an engine rebuild and possibly a turbo convertsion while its out.

Thoughts?