PDA

View Full Version : williams ECU


busterhymes
09-05-2009, 17:57
as above anyone help out just sold my spare would u believe it :( needed urgently ta
busterhymes
09-05-2009, 19:22
bump :)
busterhymes
09-05-2009, 21:03
bump
schakal
09-05-2009, 21:11
cant you get a valver ecu and stick a standard willy chip in it ?? :idea:
busterhymes
09-05-2009, 23:24
didnt think they were compatible :?
summeh
10-05-2009, 00:22
So long as its 1991 onwards (fenix 3a) then you will be fine. the map chips are compatible.

The only different ones are the 1990 ecu's (early phase 1 valvers). these use different map locations and don't run an o2 sensor (or a cat iirc).
schakal
10-05-2009, 00:32
may i kinda rephrase that :wink:
clio ecus are ghey get a renault 19 16v one
year ,make etc unimportant :P




stan knowsit :D
busterhymes
10-05-2009, 07:35
So long as its 1991 onwards (fenix 3a) then you will be fine. the map chips are compatible.

The only different ones are the 1990 ecu's (early phase 1 valvers). these use different map locations and don't run an o2 sensor (or a cat iirc).

how can i identify the difference between an earlier model ecu and the later :)
busterhymes
10-05-2009, 08:18
So long as its 1991 onwards (fenix 3a) then you will be fine. the map chips are compatible.

The only different ones are the 1990 ecu's (early phase 1 valvers). these use different map locations and don't run an o2 sensor (or a cat iirc).

how can i identify the difference between an earlier model ecu and the later :)


can i use a PH2 ecu also :?
summeh
10-05-2009, 15:19
So long as its 1991 onwards (fenix 3a) then you will be fine. the map chips are compatible.

The only different ones are the 1990 ecu's (early phase 1 valvers). these use different map locations and don't run an o2 sensor (or a cat iirc).

how can i identify the difference between an earlier model ecu and the later :)


can i use a PH2 ecu also :?

Was it made after 1991? :D

Not sure actually, as far as i know though the "map locations" hence the map chips are the same, however im not sure if there is extra guff in there for an immobiliser... dont think so though?
busterhymes
11-05-2009, 13:19
bump
schakal
11-05-2009, 17:52
there is one for sale on kiddvalver ,cheap as chips as well :D
busterhymes
11-05-2009, 18:05
u got a link m8 :D
schakal
11-05-2009, 18:30
damm you :D
http://www.clio16valver.co.uk/forum/viewtopic.php?t=27152&highlight=
busterhymes
11-05-2009, 18:42
ha ha would have been a good one as it was my spare which i sold recently which is not funny now i need one :oops:
busterhymes
12-05-2009, 12:56
bump anyone ? :(
schakal
12-05-2009, 12:57
bump anyone ? :(

whats wrong with the one on that link ?? :?
busterhymes
12-05-2009, 13:31
bump anyone ? :(

whats wrong with the one on that link ?? :?

it was a spare i had that i advertised on the site my user name on there is martin_clio and i sold it hence me bein pissed has the penny dropped or the light bulb come on yet m8 :roll: :wink:

so still looking :(
busterhymes
24-05-2009, 20:01
bump, still need one as one i got faulty :(
busterhymes
28-05-2009, 05:05
anyone help out on this pls :(
bass_direct
28-05-2009, 11:18
I still have the ECU that i used in my 2.0 hybrid, comes with chip carrier, plus Gunner180 2.0 chip, and optional HillPower 2.0 map.

£100 delivered.
busterhymes
01-06-2009, 08:49
still looking for one :(
busterhymes
02-06-2009, 10:34
been offered two sent messages but no answers whats that all about :? so guess still looking :(
midge
02-06-2009, 19:44
im sending you a pm with the pics you asked for (took me a while to upload them)