PDA

View Full Version : Renault 5 GT turbo caliper carrier slider bolts


firas
06-05-2009, 12:33
as above please.
firas
07-05-2009, 20:12
anyone ?
schakal
07-05-2009, 20:17
might have :D
have you got the old ones for comparison ?
firas
08-05-2009, 22:08
ah that would be great. yeh ive got one of the old ones. here is a pic of it

http://i45.photobucket.com/albums/f81/arseanno1/clp.jpg


this is where it goes in to the caliper carriers.

http://i45.photobucket.com/albums/f81/arseanno1/7eee6ec2.jpg


[/img]
schakal
08-05-2009, 22:53
i have seen many different types and sizes of them slider pins
pissing with renaults mate , i really need some measurements
from you to be sure .
whats the length of the pin from bolt to the end ?
whats the diameter ?is it all round or are there flat bits along the pin ?

quite busy at work a minute though ,i can only check them on
sunday for you .
col
09-05-2009, 19:34
Also what make is it....Girling........bendix.........Lucas.

I can tell you a girling cradle will fit a lucas caliper ! ...i know cause mine were seized......an i tried it until i unseized the slider :wink:


regards Col
firas
10-05-2009, 01:17
not sure on the make tbh mate. will get measurements up though
col
10-05-2009, 10:28
I reckon its either Bendix or girling,,,,,....dependant on what year your r5 is....they mix an matched all over the place.

It was probably what "gallouise ciggy"....the dieppe fitter was smokin at the time.... :lol:
schakal
10-05-2009, 12:46
ok i managed to look as promised ,just to show off
here is some of my braking hardware collection :wink:
i can see some similar looking pins to ones on your pics .


http://i66.photobucket.com/albums/h241/renaultparts/SDC10297.jpg
col
10-05-2009, 14:55
Sometimes Evren your such a bloody show off! :lol: :lol:
firas
11-05-2009, 13:18
hi

ok i have found out that the sliders i need are from a renault 5 gt turbo from 1986 to 1990.

the measurents are

length is 60mm
the end is 16mm

hope this is of any help
schakal
11-05-2009, 14:08
hi

ok i have found out that the sliders i need are from a renault 5 gt turbo from 1986 to 1990.

the measurents are

length is 60mm
the end is 16mm

hope this is of any help

got them :D
pm on its way
firas
11-05-2009, 16:29
pm'd back mate. also when i said the en diameter being 16mm i wasnt talking about teh girth of the actual slider but teh end bolt that is flattened. hope this is what u understood mate as i want very clear
firas
12-05-2009, 21:08
shakal im still considering your offer of 2 sliders but just need 1 more if anyone has one please?
firas
13-05-2009, 12:11
anyone have any going spare?