View Full Version : "BLEEDING BRAKES"!
Right ladies an gents, whats the sequence for bleeding the brakes on the willys 2.......ive decided to drain the system an replace master cylinder and front discs an pads....ive already done the rear....cheers guys! :wink:
16v_paddy
23-04-2009, 19:07
afaik you start furthest away from the master cylinder, so rear left, rear right, front left then front right
Cheers Paddy,..........should help get rid of the "sponge" an replace it with proper brakes :)
16v_paddy
23-04-2009, 19:25
have you got braided hoses? they really make a positive difference imo
katbloke
23-04-2009, 20:04
bleed with bias valve open or closed? or no difference?
thats a thought paddy, braided hoses , might as well considerin im doin everythin else. 8)
..bias valve open or close,,,,,,you know i didnt check that katbloke?........thanks :wink:
Bleed with bias valve open, preferably with wheels on ground. If it's seized, easy to sort.
16v_paddy
23-04-2009, 23:02
thats a thought paddy, braided hoses , might as well considerin im doin everythin else. 8)
..bias valve open or close,,,,,,you know i didnt check that katbloke?........thanks :wink:
couldn't say how much improvement they make on their own as I replace everything all at the same time, discs, pads, calipers and hoses. Then I took it to a garge to get it on a pressure bleeder and put some mercedes AMG fluid in and all that lot made a massive improvement with the brakes
that was all fine for a bit then I got some wilwoods :twisted:
how much difference they make will depend how shagged the originals are
Thats true maxi,....im due to check the front end this saturday...i know the "bendix" system is simple enough ,so for now ill just clean the system up (as long as it works) an see what happens :wink:
busterhymes
24-04-2009, 10:48
bleed sequence for non abs
R/H rear
L/H front
L/H rear
R/H front
bleed sequence for abs
L/h front
R/H front
L/H rear
R/H rear
to be done on level ground with handbrake off
Im gettin confused here, paddy said one way an buster says another :? ........which one ?.......non abs. on mine...cheers guys
either..
but buster takes into account there on the same section of master cylinder/linked..
but either works..
Cheers maxi......your a goodun! 8)
bleed sequence for non abs
R/H rear
L/H front
L/H rear
R/H front
i woz told this is the sequence for older cars than ours like metros and stuff that run different brakin systems rear then the front is fine on mine
works on a clio too as there linked on a dual master cylinder too.
LEIGH-ANNE
25-04-2009, 13:34
Cheers maxi......your a goodun! 8)
Thank god for maxiboy ah? :thumbsup:
busterhymes
25-04-2009, 14:59
maxiboy to the rescue :wink:
Does he tuck his vest into his pants............?
Does he tuck his vest into his pants............?
who doesn't? :roll:
So were all "supermen"........... =D> .........exellent!
LEIGH-ANNE
26-04-2009, 09:45
Awww all u boys are my supermen :oops:
( :twisted: :P :wink: :roll: )
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.