View Full Version : Turning coil upside down
KingStromba
02-07-2005, 21:11
Can you do this, does it look any neater?
Mine is off at mo. Doesnt Winstonian have his upside down?
ONly worthwile if you are fitting a strut brace surely...
http://img177.imageshack.us/img177/4784/willyengine28wn.jpg
VIPERONE
02-07-2005, 23:43
Aye i do strombone.......mines polished to :P
Winston btw :shock:
yep...only needs doing for strut brace.and dependant on which brace, ul need to file a bit out of the body so the brace will fit under it properly
KingStromba
03-07-2005, 01:17
But if you turn it upside down the engine bay looks tidyer as fewer wires show, :D
VIPERONE
03-07-2005, 01:27
Amen
MatBrown
03-07-2005, 12:49
But if you turn it upside down the engine bay looks tidyer as fewer wires show, :D
But all the spark falls to the bottom.
Mat.
when i get round to fitting my strut brace, i gotta turn the coil upside down, however what does this wire do (green arrow)?? its attached to the nut (blue arrow) is it just an earth? and, will i need to turn the alarm off (at black box)cos i had a nasty experience of fiddling with the battery once and the alarm went off in my ear. :cry:
http://i18.photobucket.com/albums/b103/hubnut/coil1.jpg
thanks!
KingStromba
03-07-2005, 18:32
It stops radio interference?
KingStromba
03-07-2005, 18:38
Some lead does, think its that one.
KingStromba
03-07-2005, 18:39
Its called a radio interference supressor apparently
Andyvalver
03-07-2005, 19:19
Winstons coil is upside down i think
http://i6.photobucket.com/albums/y209/Willyvalve/Minefcs05.jpg
Only pic i have, look in the corner......hmmmmm shiney :D
KingStromba
03-07-2005, 21:22
Mine will soone be shiny too :D
Nick Hill
04-07-2005, 19:37
The part arrowed on the pic is the radio suppreer for the low tesion side of the ignition system. Pretty much all ht leads now days are suppressed.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.