View Full Version : Exhuast downpipe and dell'orto manifold if possible.
filthyjohn
16-01-2009, 14:07
Hi there, new member here.
I'm looking for a williams downpipe, I already have the tubular manifold just need the DP to match.
I also need a carb manifold to suit weber/dell'orto 40s, is there a source for these anywhere on the web? Electronic cash waiting.
I'll say this bit really quietly, and hide it in some brackets: (the engine is in one of those ugly old volvos, Shhhhh.)
Thanks for any help folks.
i have a downpipe, will only sell with the manifold though (difficult to sell a manifold on without it) £77 delivered
filthyjohn
16-01-2009, 15:15
£77 for both shipped?
Interested like. Ok to do things over ebay/paypal?
chadil for inlet mani mate........suit weber 45s dcoe
filthyjohn
16-01-2009, 15:56
Sorry you've lost me there mate, is chadil a company? my google-fu is weak.
filthyjohn
16-01-2009, 15:58
Actually yeah just found them. 260EUROs for F7R, not bad. I assume for that money they're of high quality?
AndyFielder
16-01-2009, 16:17
there is one on ebay atm i think midge has the link somewere.
filthyjohn
16-01-2009, 16:43
I can't find it if there is, maybe it's listed under some spelling error or something?
I did find this though:
http://cgi.ebay.co.uk/KEITH-MANIFOLD-lets-sit-down-lp-vinyl-uk-westwood-19_W0QQitemZ200290437504QQcmdZViewItemQQptZUK_Reco rds?hash=item200290437504&_trksid=p3286.c0.m14&_trkparms=72%3A1301
Doesn't say whether it suits 45s though. :lol:
katbloke
16-01-2009, 17:21
http://www.williamsclio.co.uk/forum/viewtopic.php?t=33812
?
they arent the best quality tbh mate. but a bit of time with the dremel n they all good ;)
The Chadil DCOE manifolds for a williams re 260euro, +shipping+tax
It works out about £310 delivered, direct.
I deal alot with them, and can sell them at £280.
If your intrested, email me at info@ap-deveopments.com
Craig
filthyjohn
16-01-2009, 20:22
http://www.williamsclio.co.uk/forum/viewtopic.php?t=33812
?
I read that as being a pair of throttle bodies without manifold. I'd probably use bodies TBH, but I already have the dell'ortos here so thought I'd bash them on and see how it goes.
I deal alot with them, and can sell them at £280. Craig
Thanks for that mate, I may be in touch soon.
Fitting the valver engine to the volvo was supposed to be an attempt at doubling the stock power as cheaply as possible, so I may have a bash at making a manifold first. At least I know there's a good one available if I make a hash of it.
Do you have any in stock, already in the country? Or would there be a wait?
Cheers all.
katbloke
16-01-2009, 20:32
my apologies i read it wrong, thought was manifold for dcoes
filthyjohn
16-01-2009, 20:40
Nah I can see how that happened, I read it twice before I cottoned on LOL, but then I've been looking for one for ages so every ad I read says 'manifold' :lol:
sideways danny
16-01-2009, 22:13
they arent the best quality tbh mate. but a bit of time with the dremel n they all good ;)
does take quite a bit of work, and the ports are really too big to start with. Wish Jenvey made one :( have to bug them more
filthyjohn
25-01-2009, 23:01
Just thought I'd mention I'm sorted for a downpipe now, and making my own inlet manifold. It's a pig of a job because of the oval ports, but it's got to be better than spending a quarter of the car's budget on one component eh?
Thanks for the help guys!
If you want a CNC'd 10mm aluminium flange, I can supply them for £75.
Craig
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.