where to buy battery relocation kits?

[ThRaXaIR]

as question really guys. can anyone point me to any websites that sell relocation kits as im stumped.

otherwise can anyone tell me the size of the cable needed to run from the front to the back. as im a sparky so i'll have it out the back of the van :P nice 25mm tail i wrekon..

[speed]

i dont thnk ive seen anywere that sells kits, i had to get the parts seperate.

join need joint box, tweeks
i used 25mm2 cable
lugs
and a battery box from ebay or tweeks etc

i placed mine behing the pass seat as the rear is stripped, i used 3m power and 1m earth

[Robb]

Danny ACE and myself are using 16mm cable

[ThRaXaIR]

how many amps does a car need to pull then? minus stereo. bet you could get it down to a 6mm really that'll take bout 34A maximum load.

cheers for that guys

[ThRaXaIR]

on a second note is there a hole available between the footwell and the engine bay that the cable can travel through or do i need to drill it myself!?

cheers

[speed]

not too sure about the amps the 25mm i used is 230a deffo overkill.
on cranking the engine it draws more power,
i have a kill switch thats rated 100amp continuos and 500 amp for 5 sec

for the hole i used one that my std alarm was at. only grommet i can think of is in the scuttle were the loom goes thru' maybe tight

[ThRaXaIR]

do tweeks sell kill switchs as well? cheers

[bbaazz-08]

yep dey do......ders a big grommet between the passengers footwell and the suspesion strut tower....you can go through there

[ThRaXaIR]

excellent cheers dude