PDA

View Full Version : *** Williams weight distribution ***



nonamer
24-09-2008, 14:18
hi there,

i'm thinking about relocating the battery in my williams from under the hood and to the boot area (not sure where exactly yet). this should free up quite a lot of space in front and supposedly benefit weight distribution. is it a good idea?

and what exactly is the case with the weight distribution in clio williams?

thanks! :idea: :?:

Coops
24-09-2008, 17:22
65/35 bias front i think so any extra weight to rear should in theory be benficial, buts its a mind game and a half :P

also my battery is in passenger side of the boot and my earthing isnt brilliant, so bare that in mind

MAXIBOY
24-09-2008, 18:32
i fitted mine in the passenger rear footwell as i have no rear seats..

but ran both cables to the front earth and live and added a rear earth as well...

plus i then added extra engine earths to the same point..

also its a good time to fit a light weight battery too.

ThRaXaIR
24-09-2008, 21:03
is it recommended to run live and neutral/earth to the front of the car as opposed to getting your earth from the bodywork? will coming off the bodywork give a high resistance reading?

cheers

MAXIBOY
24-09-2008, 22:17
it can sometimes as most of the electrics are are at the front of the car..

though most don't and its fine...as i said i've added extra earths to make sure its fine..

only thing you can do is see

nonamer
25-09-2008, 09:07
would you guys post some pictures please? would be good to have for the future reference! :)

thanks! :D