View Full Version : Wheel Bolts...
1995clio16v
14-09-2008, 19:18
Bastard wheel bolt has snapped in me wheel! ****s sake.
Head has come off.
Any tips on getting it out?
Last time it happened, I just drilled down the middle a couple of times.
Can anyone expand a bit more on better ways?
Cheers
PS PISSED OFF!
MatBrown
14-09-2008, 20:02
Couple of ways to try.
Firstly remove the wheel.
Can try just tapping it round with a hammer and punch.
Or remove the brake disc and get a pair of mole grips on either the front or back of it.
Mat.
volymmannen
14-09-2008, 20:09
the best way is to weld a nut over the broken bolt, the heat will make loose, and you can use a tool and untighten the broken bolt..
the best way is to weld a nut over the broken bolt, the heat will make loose, and you can use a tool and untighten the broken bolt..
I've seen that done and was amazed by its effectiveness
katbloke
15-09-2008, 09:11
i snapped a locking bolt the weekend, just drilled into it and managed to tap it around with a screwdriver and hammer, cost me 30quid for a whole new set though
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.