View Full Version : Williams 3
No wheels, engine or running gear
Everything else up for grabs... mint interior etc
Cheers
Winston
spikey-ben
07-08-2008, 12:29
Hi winston, im after a drivers front wheel arch liner ( the one that goes closest to front bumper)
spikey-ben
07-08-2008, 12:31
Doh almost forgot (no edit button) Im needing a downpipe for my williams as well. If You could let us know. Cheers ben :)
how is the drivers door winston - is it upto my extra high standards ?
The FAIL door
http://i64.photobucket.com/albums/h175/76ball/illiams%203/PICT4572.jpg
fasterthanjesus
07-08-2008, 20:01
fuel bowl ?
standard exhaust ?
front discs (condition?) ?
ta
fasterthanjesus
07-08-2008, 20:03
front hubs?
dibs on the driver and passenger door cards and pockets etc (whats condition like mate???)
also tailgate??? rust/rot free??
fuel bowl ? - Whats that? :oops:
standard exhaust ? - yes but its rottern
front discs (condition?) - need them myself sorry
dibs on the driver and passenger door cards and pockets etc (whats condition like mate???)
also tailgate??? rust/rot free??
The passenger card is mint.. drivers ok
The tailgate has minor rust... best willy 3 tailgate ive come across lol
http://i64.photobucket.com/albums/h175/76ball/illiams%203/PICT4577.jpg
http://i64.photobucket.com/albums/h175/76ball/illiams%203/PICT4576.jpg
fasterthanjesus
08-08-2008, 06:34
o/s rear quarter panel. not bothered about the arch - propably rusty. but need a rust free fuel section as previous owner cut mine out to put dimma fuel cap in.
need 6 inches round fuel section to weld into mine. if its in ok condition.
could do with fronhubs as i have another set of warped discs. its either gsf being really crap with the quality of their discs or i have a warped hub.
cheers
winston wiper arm and cover ta ;D
Fuel cap area is totally fubared and i need the hubs for my conversion.... Im not doing very well am I :oops:
Allan... catch me on msn dude
More pictures
http://s64.photobucket.com/albums/h175/76ball/illiams%203/
This is a poor effort Winston! lol
how much for cards mate??? and how much for tailgate? also where is the rust on it??? is the wiper arm rot free(where it comes out of tailgate)
fasterthanjesus
08-08-2008, 19:04
sunroof roller blind either side. ?
dont tell me - its either rusty or you need it?? :wink:
I can do the blinds... Free lol
Door cards make me an offer... I can post them for £8
Tailgate... has only small small amount on the under side near the catch... but ive had alot of interest in this and its sold pending pick up
£20 delivered for door cards???
seen as its you... The WC Original Gangster :)
if the passneger side roller blind is still good let me know winston :D clip is snapped on mine :/
talkingfish
11-08-2008, 10:57
another completely rust-shagged Willy 3.......
fasterthanjesus
11-08-2008, 17:26
drivers side roller blind. pm for delivery/payment etc.
do you accept paypal mate??? please pm me your details etc etc
dimmajon
12-08-2008, 15:21
how much for the bare shell winston with rear beam if u still have it
You do not want this shell... The rust is just plain dangerous
Free bump - cheers for the bits!
Top seller here!
Quinster
26-08-2008, 12:55
Hiya,
Do you still have the ABS modulator? Mine is a Williams 3 so the part number should be the same, but here it is anyway - 0265 208 047.
Thanks, Lee.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.