View Full Version : 16v 2.2l lol
http://cgi.ebay.co.uk/1995-RENAULT-CLIO-16V-RED_W0QQitemZ150279276978QQcmdZViewItem?hash=item1 50279276978&_trkparms=39%3A1%7C66%3A2%7C65%3A10&_trksid=p3286.c0.m14.l1318
rob-legend
05-08-2008, 19:24
sounds legit 8)
theres a guy on another forum swears his is 2.2 as well..
Clio_GTT
05-08-2008, 21:27
Don't prima sell the pistons for 2.2?
sounds like a crock of shit to me!
doubtful as you would need to run a 87mm bore to get a proper 2.2 capacity..
and i would think you would suffer serious bore flex even if it went that far...
maybe at 86mm and 2160cc it might just run..not a proper 2.2...
only other way would be a longer stroke crank in an engine with a much longer stroke than is optimum anyway..
think a proper 2.2 would lose power over a good 2.0
OOOH Its durham so must be local to me!! If my Valver was running I'd go ava deek!
All that spec! no wonder he cant afford a camera!!
primers conversion is overbore to 2.1
MatrixGuy
07-08-2008, 18:09
I got me money at the ready! lol :lol:
lol, what a bellend, you cant 2.2 a Williams as the cylinder walls are too thin... I suppose you could, but that chav ****wit would have killed it by now.
love the fact it has "chips" too... dual ECU's? :lol:
Bailey_1260
10-08-2008, 11:21
love the fact it has "chips" too... dual ECU's? :lol:
no, when you buy the car he leaves a bag of chips on the passenger seat for the drive home :P
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.