View Full Version : how to fit these fuel pump¬?
obie_shaun996
31-07-2008, 19:50
http://cgi.ebay.co.uk/WALBRO-255lh-FUEL-PUMP-RENAULT-CLIO-1-8-16v-WILLIAMS_W0QQitemZ310041821041QQihZ021QQcategoryZ2 3010QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
how do i fit this fuel pump to my old pump.. mine has a big ass housin around it. how does it come apart?
also will this work on mine? standard clio 16v phase 1
yeah thats the one i fitted in my ph1 you need to wind the old one out of the tank then fit that into the original housing,you will either need to make a tool or buy one to wind the pump housing out
drill out the pop rivet
unclip the lower case and remove
remove old filter
unclip the pump and remove
some kits come with new wiring to convert your pump. Make sure u get the right one as there are loads out there.
Phase one is very tricky!!!
obie_shaun996
07-08-2008, 18:59
what one would u say is a good kit?
obie_shaun996
08-08-2008, 20:59
what sort of pop rivit is it?
its a big one - thats the only bit that isnt supplied in the kit. u will need to source a rivet and a gun to fit it
obie_shaun996
09-08-2008, 17:45
thanks mate. hopfully get this sorted soon and bk on the road to happyness :lol:
BristolSam16v
10-08-2008, 11:58
or you can just drill a hole and put a bolt through it, or on mine I bent the pipe out to hold it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.