View Full Version : High Spec 16v (and other) Parts
LEDA Coilover Kit - Never fitted - Fast Road Setup - £650
http://www.cliosport.net/forum/showt...hlight=Colin_S
High Spec 4 Pot, 325mm Kit - Never Fitted - £550
http://www.k-tecracing.com/show_product.asp?id=869
NOS Direct Port Kit with Purge Kit - £450
http://www.holley.com/05082NOS.asp
Full Powerflex Polly Bush Kit - Never Fitted - £100
http://www.k-tecracing.com/show_product.asp?id=1053
B&M Short Shift - Never Fitted - £90
http://www.k-tecracing.com/show_product.asp?id=198
One of the highest spec 2.0 16v Williams N/A Engines ever built. Speak to Andy at GDI for full details on bottom end and Ben at Angleworks for head.
Bottom End:
Williams Bottom End
Lightened and ballanced everything
Knife Edge Crank
Shot Peed everything
Forged Pistons
Head:
Megan Head
Ported and Polished
Highest Profile Angleworks Cams for hydraulic lifters
Angleworks Vernier Pulleys
Custom Valves, largest that fit the head, (all 16)
Basically everything that can be done has been done
Omex Stand Alone ECU
The engine has never been fitted and the head and bottom end is still seperate. I have paid for everything to be done, engine built and setup,
The engine has been designed for throttle bodies which will need to be purchased.
Est BHP about 250
Over 8k spent, looking for offers in the region of 3k
LEDA Coilover Kit - Never fitted - Fast Road Setup - £650
http://www.cliosport.net/forum/showthread.php?t=56136
shame colin, did you ever sought out who stole/lost your car and get them back? How comes your selling up?
id like the powerflex kit, are you open to any offers as its only a pound more on ktec
shame colin, did you ever sought out who stole/lost your car and get them back? How comes your selling up?
Kind of, it's still ongoing through the courts, that can take a while. I'm just moving on now buddy, with the car gone i'm just not into it anymore.
id like the powerflex kit, are you open to any offers as its only a pound more on ktec
Didn't notice it had come down so much, they are pretty much sold anyway but i'll let you know if it falls through.
B&M also sold
Im asuming the Ledas ar for a 16v / Williams ?
On the front struts can you measure the piston length when fully extended. Just want to compare this to the ones i have as some have got shortened rods and some have std length.
Thanks you.!!!!
Polly Bush Kit sold
Im asuming the Ledas ar for a 16v / Williams ?
On the front struts can you measure the piston length when fully extended. Just want to compare this to the ones i have as some have got shortened rods and some have std length.
Thanks you.!!!!
I'll try to bud
Im asuming the Ledas ar for a 16v / Williams ?
On the front struts can you measure the piston length when fully extended. Just want to compare this to the ones i have as some have got shortened rods and some have std length.
Thanks you.!!!!did you say your leda's fit both mate?
Na don't do a willy without modding to bottom mounts
http://www.smithspace.co.uk/2.JPG
http://www.smithspace.co.uk/3.JPG
http://www.smithspace.co.uk/4.JPG
http://www.smithspace.co.uk/5.JPG
http://www.smithspace.co.uk/6.JPG
http://www.smithspace.co.uk/7.JPG
http://www.smithspace.co.uk/8.JPG
http://www.smithspace.co.uk/9.JPG
http://www.smithspace.co.uk/10.JPG
http://www.smithspace.co.uk/11.JPG
http://www.smithspace.co.uk/12.JPG
http://www.smithspace.co.uk/13.JPG
http://www.smithspace.co.uk/14.JPG
http://www.smithspace.co.uk/15.JPG
http://www.smithspace.co.uk/16.JPG
http://www.smithspace.co.uk/17.JPG
http://www.smithspace.co.uk/18.JPG
Hi mate, would you sell any of the engine parts seperate, i.e. head seperate to block etc or is it as a whole?
dimmajon
15-06-2008, 04:40
whats cheapest you could do the nos kit for? bit out of me price range dat
Engine now sold!!!!!!!
The following are still available, PM me or e-mail on colin@smithspace.co.uk
LEDA Coilover Kit - Never fitted - Fast Road Setup - £650
http://www.cliosport.net/forum/showt...hlight=Colin_S
http://www.smithspace.co.uk/Parts/2.JPG
http://www.smithspace.co.uk/Parts/3.JPG
http://www.smithspace.co.uk/Parts/4.JPG
http://www.smithspace.co.uk/Parts/5.JPG
http://www.smithspace.co.uk/Parts/6.JPG
http://www.smithspace.co.uk/Parts/7.JPG
High Spec 4 Pot, 325mm Kit - Never Fitted - £550
http://www.k-tecracing.com/show_product.asp?id=869
http://www.smithspace.co.uk/Parts/8.JPG
http://www.smithspace.co.uk/Parts/9.JPG
http://www.smithspace.co.uk/Parts/10.JPG
http://www.smithspace.co.uk/Parts/11.JPG
http://www.smithspace.co.uk/Parts/12.JPG
http://www.smithspace.co.uk/Parts/13.JPG
NOS Direct Port Kit with Purge Kit - £450
http://www.holley.com/05082NOS.asp
http://www.smithspace.co.uk/Parts/14.JPG
http://www.smithspace.co.uk/Parts/15.JPG
http://www.smithspace.co.uk/Parts/16.JPG
http://www.smithspace.co.uk/Parts/17.JPG
http://www.smithspace.co.uk/Parts/18.JPG
Anyone interested in the NOs or brakes?
are those brakes for 17s only ? or will they fit under a 16?
what is the total space needed ta
They wont fit under 16s buddy. Not sure what the total space required is.
and should say they will only fit under a 17" wheel or larger
NOS now kit on ebay:
http://cgi.ebay.co.uk/Direct-Port-Nitrous-Kit-Holley-NOS-with-Purcge-Valve_W0QQitemZ250301141932QQcmdZViewItem?hash=ite m250301141932&_trkparms=39%3A1%7C66%3A2%7C65%3A2%7C240%3A1318&_trksid=p3286.c0.m14
Nitrous gone now, just got the brakes left now.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.