View Full Version : Williams Bottom Rad Coolant Hose
eternalife
05-05-2008, 23:02
Needed urgently - must be in perfect condition.
I believe it has 5 Branches as follows:
Rad
Water Pump
Aux Water Pump
Oil Cooler
Metal Pipe running along side engine (preferably to include the metal Pipe also.
I believe people running after-market oil coolers should have these spare.
AndyFielder
06-05-2008, 09:31
i have the above knocking around.
I will have my samcos in 3 weeks MAX which would help me match them up, else i can just dig out what i think you need and send it out to you.
Up to you!
PM me an offer, also.
Andy
Justin..
06-05-2008, 09:51
samco dont supply the front hose due to the 2 types.
heres a dialogys pic
http://i14.photobucket.com/albums/a341/justin_2k5/woop.jpg
AndyFielder
06-05-2008, 09:55
your joking!
Im going to go mental if its not in the kit.... i will have a look for you, as im doing away with the cooler etc.
PM me an offer, for the whole lot!
The samcos i got are for a valver, so there is only one type for them.
Justin..
06-05-2008, 09:59
no joke mate. its not in the kits i bought. k-tec should comfirm this
i have a samco silicone bottom hoses.
eternalife
06-05-2008, 21:33
i have a samco silicone bottom hoses.
Show Off!!!! :wink:
Is it the valver 3 branch or the williams 5 branch (as shown above in justins post)
the samco is the 5 branch type... with the cooler. i had to connect both cooler hoses together to bypass the oil cooler....
would like a non cooler set but couldn't find them at the time...
i,ll have a look for a hose if you haven't got one yet :D
eternalife
07-05-2008, 00:06
the samco is the 5 branch type... with the cooler. i had to connect both cooler hoses together to bypass the oil cooler....
would like a non cooler set but couldn't find them at the time...
i,ll have a look for a hose if you haven't got one yet :D
I had a look at bypassing the Oil cooler and using the 3 branch valver Bottom Rad hose, but it just didnt seem to make sense - and therefore aborted this.
I got a hose now (thanks), but think its a good idea to keep some spare. So if anyone still has some (with no tears rips or anything of the like) I am interested in purchasing.
Although I am now more interested in this Samco one you have :twisted:
Can you PM me details of where you got it from?
Would definitely be interested in upgrading.
AndyFielder
07-05-2008, 09:06
looked at my samco sets again, looks like i will be getting the hose! Bought all 3 for a valver.. so no oil cooler :D
Just goes to show how over priced and rubbish Ktec are!
Justin..
07-05-2008, 09:35
just checed my samco set and it has the the oil cooler piping :oops:
eternalife
07-05-2008, 11:58
^^ Surely they must produce the 3 Branch Pipe also
If anyone has Samco (or equivalent) 5 branch that they will not be using (and willing to sell) please let me know.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.