View Full Version : ARB Bushes
MattyH16valver
02-05-2008, 10:53
Hi, does anyone know where I can get some of these from for fairly cheap? Are they real bastards to fit?
Cheers
Matt
talkingfish
02-05-2008, 11:25
I'm looking at getting mine done - they are only about £6 + VAT from Renault - but they are a shit to fit apparantly....
Easy enough to fit, just need a G clamp or two
MattyH16valver
02-05-2008, 11:51
I'm looking at getting mine done - they are only about £6 + VAT from Renault - but they are a s**t to fit apparantly....
Yeah....not too bad price then! 8)
MattyH16valver
02-05-2008, 11:52
Easy enough to fit, just need a G clamp or two
I remember seeing ur post when i did a serch mate. So is there and Inner and Outer Bush Bush for each side that you need to get?
Cheers. Matt
yeah inner and outer, outers are easy enough, inners can be fiddly as tight fit and not much space under there to get clamps etc in
Hi, does anyone know where I can get some of these from for fairly cheap? Are they real bastards to fit?
Cheers
Matt
Try here:
http://www.powerflex.co.uk/select_products.asp
I got mine from Rally Design but they are not for Williams :( They do R5 GTT though which may fit...
The williams is different to my thread i posted up, they are the 16v ones, i can confirm R5 GTT ones fit, thats what i'm running on mine, poly race ones from Rally Design.
As above outers are easy enough think i used a G clamp to compress the clamp up and got the bolt in.
Inners are a bit more tricky but use a g clamp to compress them and a small spanner to hold the bits together to get the bolt in, as there isn't enough room to get a g clamp on the bit that the bolts go through
MattyH16valver
02-05-2008, 12:47
Well i'm bying new wishbones from buypartsby.co.uk as there cheap as chips and want to keep the car stardard really so I don't think that ill be going for polly bushes! Looks like I need a G Clamp too then...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.