View Full Version : Valver front suspension - standard or lowered
After some decent suspension to replace my fooked suspension on my valver.
Can be standard or uprated/lowered kit, lowered is preferable.
Must be local to Leicester and as cheap as poss.
What you got?
alex_blue16v
01-05-2008, 10:03
ive got my lowered suspension that ive taken off the valver to fit my coilovers, not sure if its springs or springs and dampers can check for you tonight if you want?
seemed good enough when i was using it, a bit far from you but il let it go super cheap.
alex
Can you give details please mate?
Basically my suspension is completely shot and is pissing oil out everywhere, not dampening at all and it a nightmare when going over bumps, so i need it replaced with something ASAP.
If your suspension is in good nick, lowered, then i'll probably have it TBH.
Where are you mate? Don't mind travelling too much but obviously if you're in scotland that might be problem, lol.
Cheers.
alex_blue16v
01-05-2008, 10:22
pm'd dude
Ive got 2 Apex front dampners, no springs tho...
ive got two front dampers/springs too!
Sam
Sourced some now, cheers Alex.
:D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.