View Full Version : ign coil diagram to run omex rev limiter.
Hi-anyone no or have the wiring diagram for the std ign coil?ive got a omex rev limiter which req the wires to go across the coil ie +and- but im havin probs with it not working as the clio int like your average std ign coil.cheers
Im intersted how people have done this too...
Come on..bump
Im 99% sure the tacho feed is the pink wire on the 3pin plug.
The other two on the 3pin or +ve and -ve, off the top of my head they are yeallow and black conversley....I can double check tommorow.
The single wire on the 2-pin plug is the ecu feed to the amp.
well the thing is i checked the 12v feeds and the earths tried the limiter across various wires and can i fck get it to work! :cry:
assuming you want the wire to go across the live and the switched side of the coil i.e + and - on a conventional coil.
wires should be as follows
Pink and red- tacho feed
yellow- ignition live (+)
black- earth
pink and black- switched "earth" (-)
You want to wire it to the yellow and the pink and black.
Hope this helps!
assuming you want the wire to go across the live and the switched side of the coil i.e + and - on a conventional coil.
wires should be as follows
Pink and red- tacho feed
yellow- ignition live (+)
black- earth
pink and black- switched "earth" (-)
You want to wire it to the yellow and the pink and black.
Hope this helps!
Thats what im looking for-nice one ill have another play cheers
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.