lightened blanced cranks

[paudi294]

any 1 got ne ideas where i can get them done and wot sort of price. near oxford idealy

[MAXIBOY]

not sure but there,s no point in just having the crank done. all parts need to be done together and even then the gains are minimal.

[paudi294]

yeh i no that all i need nw is the crank n da wheel

[stan]

I can have them done. pm me with what you want/need.

[matty w]

as said only worth having it done if your going to be revving it high and you need rods,crank,flywheel and clutch diaphram doing

[stan]

rods dont need doing...

[Lunner]

Stan gets my vote, couldn't fault the job he did on mine :)

[lewis_willy2]

whats involved and how much does it cost?

[Lunner]

Can't remember how much mine cost, i had the flywheel lightened and the whole crank train balanced

[matty w]

well matched then i always understood you match rods aswell

[lewis_willy2]

for some reason i read 'steel cranks' #-o

[stan]

you can spend as long as you like matching and balancing rods...and pistons. theres little point. any variation in combustion (forces of which are in the order of ton's) FAR outweigh any imbalance due to a gram here or there.
besides the modern pistons and rods I deal with are very accuratly machined, and made, therefore inherently balanced.

[FQ200turbo]

how much does it cost to light/balanced all ? here in portugal is more or less 300€ :\

[FQ200turbo]

does anyone nows the weight of the stock crank ?