Oil Cooler

[Oszy]

Hi All!

Would like to know, is there an oil cooler kit in the market for Williams?
Would by because Oil temp is very high usually. I am running with Motule 20W60, but I worry :)

Could you give me your oppinion about best solution?
Where to by?

Thanks in advance.

Regards,
Oszy

[Oszy]

:)
Motule = Motul

[valver_Karl]

16 row mocal oil cooler buddy! just wonderin wot temp is she running at?

[Oszy]

16 row mocal oil cooler buddy! just wonderin wot temp is she running at?

100 by "normal use"...slalom race/highway 120?
can I find that on the net? pics spec..?

[valver_Karl]

ye that sound fine m8, motoway cainage i normally sit at 110/120 the other day i was racing an astra gsi! was sittin about 140 and my temp hit 140 at 1 point! i backed of once i saw that, but then went back to normal (100)

ye il try find you some on the internet. i got my old 1 on ebay

[valver_Karl]

hear u go m8 this will be perfect

http://cgi.ebay.co.uk/RENAULT-CLIO-19-16V-MOCAL-OIL-COOLER_W0QQitemZ270213440256QQihZ017QQcategoryZ104 10QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotoh osting


http://cgi.ebay.co.uk/CLIO-1-8-16V-WILLIAMS-172-SPORT-2-0-CUP-OIL-COOLER-KIT_W0QQitemZ150207049143QQihZ005QQcategoryZ10410Q QrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQ cmdZViewItem

[Oszy]

thanks Karl!!! :)

[Oszy]

Some more question! :)

- does the fitting of the kit require some additional moddifications?
- how many additional Oil is necesarry?

Thank you in advance.
Oszy

[AndyFielder]

if this one fails.. search for oil coolers you may find my thread... i sell a 16row kit with a thermostatic valve and stainless steel hoses for £145 delivered.

Andy

[Oszy]

if this one fails.. search for oil coolers you may find my thread... i sell a 16row kit with a thermostatic valve and stainless steel hoses for £145 delivered.

Andy

"£145 delivered"

to Hungary?? :roll:

[AndyFielder]

in the UK

[geesus]

have you got any pics of the kit andy?

[AndyFielder]

yeah...

http://www.clio16valver.co.uk/forum/viewtopic.php?t=8404&highlight=oil+cooler

[geesus]

mmmm nice 8)

[AndyFielder]

get ur name down!

[geesus]

tis very tempting i must admit!

i shall check my finances 8)

[Oszy]

yeah...

http://www.clio16valver.co.uk/forum/viewtopic.php?t=8404&highlight=oil+cooler

Nice!
Where to fit on the Willy? I mean the cooler, not the plate off course :))

[AndyFielder]

unfront of the rad, you bolt it to the cross beam... see coops project log for pics of mounting.

[Oszy]

Thanks Andy! :)

[AndyFielder]

if you both want a kit i will think about doing a group buy next month... how does that sound?

[Oszy]

actually it is 132pound inclusive delivery at the e-bay!
could you do a better price? :roll: :)

[Oszy]

I would have the 16row type!

Does it fit for the 17poo? actually a friend of my would get one as well

[AndyFielder]

yes it does, made them to fit 182, 172 and Mk1 clios.

[AndyFielder]

Ebay doesnt use stainless hoses and they will be shorter than the ones i provide. I also think it excludes the adapter that allows you to fit more than one cooler or fit put the cooler onto the engine if it alrady has the water to oil cooler fitted by Renault.

16row - £145
13row - £135

[AndyFielder]

just had a look... the ebay one doesnt have a thermostat to stop the oil getting too cold/decrease warmup times.

[Oszy]

ok! Would order one with 16row, iff possible..

Ask my friend tomorrow for additional one! :roll: :D

[AndyFielder]

ok if your mate is in then i will be collecting cash on the 20th.

[geesus]

Ebay doesnt use stainless hoses and they will be shorter than the ones i provide. I also think it excludes the adapter that allows you to fit more than one cooler or fit put the cooler onto the engine if it alrady has the water to oil cooler fitted by Renault.

16row - £145
13row - £135

so your kit has an adapter to fit an additional sandwich plate is that what you mean?

if so then i think i'm sold! :roll:

[AndyFielder]

yeah... lets you put it on top of the Renault item OR straight to the block OR buy 2 of my kits and run 2 oil coolers

[Oszy]

yeah... lets you put it on top of the Renault item OR straight to the block OR buy 2 of my kits and run 2 oil coolers

?? If you put on the top of Renault item there will be no space for the OIL Filter for sure!

[geesus]

i presume thats what the adapter is? a longer threaded piece so that this is possible?

[105epwr]

Hi All!

Would like to know, is there an oil cooler kit in the market for Williams?
Would by because Oil temp is very high usually. I am running with Motule 20W60, but I worry :)

Could you give me your oppinion about best solution?
Where to by?

Thanks in advance.

Regards,
Oszy
HI, personally i would change the oil to 10w40,20w60 sounds far to thick prob find that will cue it!

[Oszy]

Hi Mate!
Previously used 10W60 (API SL) Castrol Edge, that is preferd for high RPM I think.

20W60 Motul Motorsport Oil, I had checked (same as useing on Le-Mans races), and find a realy good Oil Pressure (1bar higher than with Castrol) even in case of 120 Oil Temperature.
I were asked to rallye engine bilder friend, and He suggested to use this Oil as well, He use for high RPM rallye cars. The only problem is that the Oil is very expensive :)

My car is not in daily use

Oszy

[AndyFielder]

should use something like 5w30 or 5w40 with the oil cooler.

use Renault filter there is room, its very small. Also the sandwich plate for my cooler is only about 25mm thick so it all fits!

Its what all the other people are selling... just with slightly longer steel hoses, bigger cooler and for slightly less...

WINWIN!

Andy