indavisual throttle bodys

[paudi294]

any 1 help im trying 2 get hold of some throttle bodys but cnt find them any where/ would be great if anyone could help

[mark]

http://www.greydevilindustries.com/products/product.asp?id=20740

they are for the 172/182 but they do supply a set for the f7 engines!
also that price is the kit fitted with ecu and everything, ring them for a price on just the boddies alone!

[valver_Karl]

they do m8,

i phoned them up the other day and gdi are suplying me a set in a few months'! this might help i asked for a couple or quotes the other day from jam sport but now gettin the work done at gdi,

Cams would be £350
Headwork starts at £450
Pistons are £500
Rods are £500
Engine management is available from £850
Throttle bodies will be £1500

all prices are plus VAT

The absolute bare minumum you'd need would be the throttle bodies and management, everything else is extra but would help the power.

There is of course a labour charge on top of that

Let me know if you'd like us to price them more accurately.

Cheers

Robin Marriott

e-mail: robin@jam-sport.co.uk
phone: 01604 755529
fax: 01604 756453
www: www.jam-sport.co.uk www.gotechracing.co.uk

[valver_Karl]

http://www.greydevilindustries.com/products/product.asp?id=20740

they are for the 17poo/18poo but they do supply a set for the F7R engines!
also that price is the kit fitted with ecu and everything, ring them for a price on just the boddies alone!

boddies alond are on special offer this month only 820ish normal price is 950 i think

[paudi294]

ok thanks alot. doing all the other bits my self. just trying 2find out wer i can get hold of them cheers. n wot sort of bhp can u get out of doing all this cheers

[valver_Karl]

about 215 with decent cams/ headwork maybe more

[paudi294]

ok cheers. do u no wher i can get the throttle bodyies from then cheers

[stan]

I can supply you with a full set-up...bodies/ecu etc. Pm me with what you want.

[paudi294]

ok cheers

[J o n]

ok cheers. do u no wher i can get the throttle bodyies from then cheers

GDI sell the bodies cheaper than anyone else if you want direct to head and also do DCOE ones. They use AT Power individual bodies which when compared directly to Jenveys make more power and torque throughout the rev range too, have a look on www.greydevilindustries.com and give them a call, Andy and the gang are really helpful. I've had ITB's on mine by the way, they were Jenvey DCOE's, but I'm upgrading to the AT Power ITB's ones now.

[stan]

since when do they sell them cheaper than anyone else?!

[J o n]

in reference to the AT Power bodies Stan :roll:

[matty w]

no trying to be funny but is anyone actually running these on a f4r/f7r yet?

[J o n]

yes, F7's are done as far as I know, but most of the ones sold already have been for the Duratec and Zetec engines and they make a fair bit more power and torque through the rev range over Jenveys. A set are going on one of their demo cars, the 2.0 16v RSI, so some direct tests will be done against the Jenveys on a stock non cammed engine.

[stan]

I dont think they have them for the williams, not unless they've had the intrest they were wanting.

[paudi294]

ive been on the web site they dont seem to have ne think on sale throttle body wise for ne cilo

cheers

[valver_Karl]

im sorting out a group buy from gdi! i rang them the other day. the last attempt went tits up. so im trying again, but iv alreay got 4 promising ppl that i know which want throttle boddies, only really need 1 more person but im gonna put a thread up soon to try get some more ppl and a bigger discount, im still waiting on an e-mail from them about prices, pm me if ur interested