View Full Version : Megane Head, Inlet Manifold and Throttle body.
AndyFielder
06-02-2008, 15:20
After the above, to ensure i get to FCS :D
Andy
AndyFielder
13-02-2008, 21:10
bump^
my old ported one may be still avalible as plans have changed with my mate!
caps sent too :D
AndyFielder
15-02-2008, 12:06
whats the crack with your mate then? Why did he change his mind?
If the caps are right then i will take it, else i will have to spend alot of cash getting the block sorted setting the head back a month!
Andy
Possibly asking a stupid question here but why'd you specifically need a 710 cylinder head Andy... You gone the ITB's route? I've got a couple of good valver heads sat doing nothing.
Mick
Got a valver inlet fanifold if that will work with the megane head
How does that work Lunner cos the 710 head has a machined gap between the cylinders 2 & 3 that causes an inlet leak if you use a 16v manifold on the megane head?
My bad Lunner... I should read things better (and there's no edit button). I thought you wrote you had a 16v inlet that would work with the 710 head.
Mink
ClioDan87
15-02-2008, 20:56
PM'd
cant see how any valver/willy inlet will work on any megane head...the ports are totally the wrong size/shape!
ClioDan87
16-02-2008, 00:27
I have the megane inlet and compared it against a williams one ... completly different as stan says! :)
AndyFielder
20-02-2008, 15:17
BUMP!
Got one here complete £125.
AndyFielder
20-02-2008, 21:44
thats bloody expensive!
Whys that?, still cheaper that repairing a knackered head if your cambelt had snapped, last time i priced valves up they alone where in excess of £150 then youve got the grief of grinding them in. So in my opiniion worth £125.
I've fitted a 16v TB to the Megane inlet Craig and it works very well. It's about run in now so the Dyno is calling ;)
Andy,
I've got a '710 head for £100 less delivery. You can pick it up from Notts if you prefer? I've also got an inlet manifold an TB but there's no TPS. I've got the EGR stuff to if you need that but these aren't included in the price of the head.
Mick
AndyFielder
21-02-2008, 10:50
I mite be interested in the head and manifold.
I will let you know monday.
whats EGR???
exhaust gas recirculation.
AndyFielder
21-02-2008, 13:09
didnt even know this was on a megane head!
To be fair it's part of the Induction/TB setup - I'm not sure what your plans are but if it's what I think they are then you won't be needing it ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.