View Full Version : Meggy parts
spryboy1974
04-02-2008, 18:18
I'm after a 2.0 16v ecu and engine loom if anyone has them.
May also want the intake manifold!?
Is there any advantage to this over a standard valver one?
are you fitting in a valver with a megane head
spryboy1974
04-02-2008, 23:22
Yes R19 16v. Sorry to swear on here! :oops:
then you better using a 1.8/willy head as the megane stuff is all different and more complicated.
if you want to use all megane stuff head/and thus inlet manifold and throttle body it is more complicated.
if so pm stan as hes the only person i know that has done the entire conversion into a clio/19 as there the same ..
AndyFielder
05-02-2008, 10:09
im after a megane head if you want to sell yours, or swap for my valver one!
Andy
AndyFielder
05-02-2008, 10:09
I have a phase 1 williams ECU also, it may be gunner chipped, will have to let you know when i can get the damn thing open!
Andy
spryboy1974
05-02-2008, 17:45
I intend to use all meggy parts,(if i can get them!).
The boys at Retro-Renault have also given me the same advice about using a valver head but i really don't see why!?
Get the immobiliser circuit removed from the meggy ecu and away you go! :D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.