View Full Version : Lambda Disconnected?
Jesse16v
01-02-2008, 21:20
Hi ive been running really rich since i bought my valver and today i took a look underneath to discover my lambda sensors wires were cut! i mean what the hell were the previous owners thinking? I cant work it out? so what have i got to do to fix this?
http://i249.photobucket.com/albums/gg216/jesse16v/Photo-0058.jpg
Jesse16v
01-02-2008, 22:23
please help?
there should be connector down the back of the block that will need wiring upto...
The connector comes across the back of the block, from the junction on the loom at the back of the gearbox above the diff
if you need a new connector, Demon Tweeks sell them IIRC, called superseal connectors or something like that
Is it chipped?Hill power chips are able to dissable the lamda via the chip,my williams track car lamda sensor is unplugged and runs fine.
BUT its lucky as im a mot tester!
Last time i had a car with a ****ed lambda when it was cold the revs would dip down to the point of stalling and then shoot back up to about 2k rpm and repeat, and when you drove it it would kangaroo, once it was warmed up it was fine....swapped lambda and it was cock on
1995clio16v
03-02-2008, 17:59
it would kangaroo
Lol!
Learner stylee! Lol!
I always piss me self laughing when you get a learner doing big massive kangaroo from set off!
I still dont know how they do it to this day!
:shock:
Bailey_1260
03-02-2008, 20:21
it would kangaroo
Lol!
Learner stylee! Lol!
I always piss me self laughing when you get a learner doing big massive kangaroo from set off!
I still dont know how they do it to this day!
:shock:
revs to low and hesitating on the bite point. :wink:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.