View Full Version : Tightening torques
spryboy1974
24-01-2008, 20:21
Can anyone please tell me what the torque settings are on a willy lump.
Mains,big ends,head bolts and cam carrier. :D
Mains 60 to 65 nm
Big Ends 40 to 45 nm
Cam Carrier 8mm 24nm
6mm 10nm
Head Bolts Stage 1 30nm
Stage 2 angle tighten by 51 degrees +- 3 degrees
Stage 3 wait for 3 minutes minimum
Stage 4 loosen all bolts completely
Stage 5 25 nm
Stage 6 angle tighten by 108 degrees +- 3 degrees
spryboy1974
24-01-2008, 22:22
Thanks a lot Maxiboy,appreciate that! :D :D :D
i agree with the mains settings, but im pretty sure the big ends are 40 - 45nm?
^^^^^^
yes there are misread them....
can they be altered then by a mod and added to the guides maybe.
thanks richy mate :oops:
np only reason i noticed was i fitted my crank/rods just the other night!! :lol:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.