View Full Version : anyone got a sparco rollcage
put some pics up for me if you can
just deciding on what cage to buy, omp or sparco :?
AndyFielder
11-01-2008, 13:18
i have one mate, not fitted tho.
I think it is a better cage, the diagonal and door bars are removable and the front section can be left off too..
Mine isnt fitted, as im having issues getting it painted, mainly caused by the bloody rain!
Andy
Matt_16v
11-01-2008, 13:23
from what I could see, Sparco is better made and in more of a kit form where as the omp is all one piece.
got any pics of it andy?
was it 6 point or 8 point? where you get it from? sorry for all the questions :oops:
yeh looking at the pdf ive got it looks like a good cage, just fancy something other than omp if i can :roll:
AndyFielder
11-01-2008, 15:08
6point my one is.
I cant work out where omp get there extra 2 points from.
Andy
Matt_16v
11-01-2008, 15:10
think they include door bars as a point?
the sparco one on my pdf is 8 point but it has fixings at the original upper seatbelt points which make up the 8
i think the omp ones have fixings at the sunvisor points?
if you could get me some pics andy that would be great? where did you get it from? ive found a 6 point one on peter lloyd rallying
does yours look like this with the door bar extensions and bar across the 2 uprights? as thats the design i want :D
http://i4.photobucket.com/albums/y105/geesus69/clio/rollcage.jpg[/img]
mine is a omp cage and all the door/diag bars can be removed aswell as the front section!
which cages go through the dash ?
you could also try saftey devices they do a clio cage, ARJ has one
weld in or bolt in mate
http://www.balancemotorsport.co.uk/search.asp
A few pictures of a "SPARCO" weld in cage ~~ hope it is of use.
http://i67.photobucket.com/albums/h305/Cliorod/Picture210.jpg
http://i67.photobucket.com/albums/h305/Cliorod/Picture211.jpg
http://i67.photobucket.com/albums/h305/Cliorod/Picture209.jpg
Excuse the "state" of the car :oops: :roll: :oops: ~~ a very ongoing project :cry:
It WILL be mint when it is done :wink: :lol: 8) ~~ later this year
was it only the works cages that picked up the rear suspension points
Dunno Maxi !!!
The shells used to come complete ~~ seam welded and strengthened with the various gusset plates etc and the cage welded in ~~ these were supplied by Matter. am not sure whether or not Matter did the MAXI shells either.
http://i36.photobucket.com/albums/e15/123maxiboy/1ca7d18f.jpg
http://i36.photobucket.com/albums/e15/123maxiboy/a8308484.jpg
like that pick up the rear axle mountings
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.