View Full Version : wilwood dimensions?
lewis_willy2
05-01-2008, 18:46
will these fit? obviously will have to manufacture some brackets?
bore size disc width part number
1.62" 41,1mm 1.25" 31,8mm 120-5179
lewis_willy2
05-01-2008, 19:22
or
powerlites
1.00" 25.4mm bore size
.79"-.86" disc width
Do a search, this was all gone through well over a year ago, iirc part numbers are listed
these are what i use and quite a few others i think
wilwood forged dynalites
1.38 35.1mm 1.00 25.4mm 120-6805
fit onto std size discs, had mine on since early 2005 and still work perfectly
lewis_willy2
05-01-2008, 19:48
ive been searching for ages and am getting there!!
is the pot size the size of the pistons? and does it matter what size they are?
ive been searching for ages and am getting there!!
is the pot size the size of the pistons? and does it matter what size they are?
yes as they need to be about equal to the original overall or you will have pedal problems.
lewis_willy2
05-01-2008, 22:53
what size is that?
not sure mate never done the maths i,m afraid...
but they need to balance up..
can,t you ring and ask what the size of the pistons is in the clio kit they supply then you will have an idea
lewis_willy2
05-01-2008, 23:00
i assume its 35mm
ive been offered some cheap and dont wanna buy if they dnt fit
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.