View Full Version : torsion bar
nhasey1602
04-01-2008, 19:36
does anybody know what size bolt is needed to take the torsion bar out for lowering?
thanks
From memory it's an M10 bolt and a 28-30mm Socket to make up the Aerospace spec tool ;)
needs to be threaded along its length and be an m10 x 1.5 pitch about 90/100mm long.
BristolSam16v
04-01-2008, 20:29
Yup m10 with nut, make sure its a longer one. Also I've had a few from b&q etc the standard ones, and they've broke so might need high tensile ones.
yeah 10.9 ones or the rare 12.9 ones
BristolSam16v
04-01-2008, 22:06
don't be shy with the WD40 either ;)
Id swear all the ones i have done have been M8.....
Dave
Id swear all the ones i have done have been M8.....
Dave
defo m10 x 1.5
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.