View Full Version : Name that manifold
Ok right i have this exhaust manifold, not sure what it is, other then covered in exhaust paste lol
Pics are at
http://www.niggy.co.uk/pics/exhaust/
anyone seen this 4 - 2 - 1 exhaust manifold before?
ARJ has an idea but will see what you all think, haven't linked the photos as they are large
cliokongen
04-01-2008, 16:01
It routes the same way as a Devil manifold.
But it doesn't have the Devil ID plaque on it.
http://i50.photobucket.com/albums/f312/Cliokongen/Devilmanifold.jpg
Michael
cliokongen
04-01-2008, 16:05
And its not a Supersprint or Renault Sport item.
http://i50.photobucket.com/albums/f312/Cliokongen/EliaSupersprintogRenaultSportmaninf.jpg
Michael
ARJ thought it could be a devil, might warrent taking it off cleaning it up and looking for some evidence
looks "home-made" with an adapted valver down pipe.
Is it just me or can no-one else see that plate on the branch which clearly says "devil" on it :?
Dan
oops looking at the wrong pic :roll: lol
Dan
cliokongen
05-01-2008, 00:28
looks "home-made" with an adapted valver down pipe.
It does indeed....
Michael
drsmith1979
05-01-2008, 15:26
anyone ever tried making their own downpipe? seems to be loads of people on here after one, if the club got a 'master' made up im sure there would be enough interest to get it fabricated on mass? relatively speaking
i think it was looked into a few years back, when everyone was raving on about blue flame, not sure anyone actually had one made though.
drsmith1979
05-01-2008, 15:32
surely cant be that hard, its the shortest part of the whole system! a little bend here and there, 2 flanges and a lambda sensor threaded hole! is it made of thicker stuff?
drsmith1979
05-01-2008, 15:33
anyone got a spare one, i dont mind popping down to blue flame in skem or doing some leg work on it
aye but which down pipe do you get done, a valver? or a williams as they are both diff or get a whole devil / super spring manifold and down pipe and copy it.
lots of options there really :D
drsmith1979
05-01-2008, 19:20
well i would do the willy one first as thats the one people want for their modifications etc.... hence being in short supply, cant be too hard.
cliokongen
05-01-2008, 23:36
You could do it as the one from Devil - one downpipe for both the Willi and the Valver. Make a flange with both set of holes.
http://i50.photobucket.com/albums/f312/Cliokongen/Manifold10Small.jpg
Michael
also the welds on the back of the manifold are from when it was repaired as it was blowing
drsmith1979
06-01-2008, 00:04
ooh like the sound of a 'joint' application, sure theres some money to be made in this 8)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.