Group A Engine mounts.

[AndyFielder]

Can people in the know chuck some pics my way, i want to try and get some made up.

Pics of the Renault 19 mounts would be good too. I hear they dont use the top mount.

Can you buy them still? Where do you rally people get them from?

Andy

[number1]

http://img.photobucket.com/albums/v602/davebell1984/100_0412.jpg

http://img.photobucket.com/albums/v602/davebell1984/100_0413.jpg

Heres some gearbox lower mounts as fitted to 19's meganes etc, stiffened the engine up quite a bit! even with a snapped top mount which i have just fixed, lol


Dave

[MAXIBOY]

this might help.....

http://i36.photobucket.com/albums/e15/123maxiboy/bcef7fc4.jpg

if you sort this i,m keen also mate.

[jamesy]

and me.

[cliorod]

That is why I bought a complete Car !!!!!! :wink: :roll: :wink: .I think for everything you need that is in that picture,it will cost you ~~ if still avavailble about £1200 plus vat.
As most people know,the "Irish" car I bought,had these on plus GpA suspension and several Gp A parts ~~ the guy who owned it,worked at "HURST'S of BELFAST" where the Works cars were based when they competed on the Circuit of Ireland,they came with these mounts and went back to France without them :oops: :roll: :oops: .
I got the a rear one made,and posted pics of it,I have a subframe,that has had a hard life,but it has the rear bracket already fitted ~~ using this set up,you will have to run either a manual rack or as I have done a remote electrical power steering pump.As !MAXI" says,the R19 can be used for the two fronts.
hope this helps.
Rod

[AndyFielder]

why do i have to remove the pas pump?

Andy

[MAXIBOY]

because the front lower mount bolts to the same place on the block as the p/s bracket i believe as the alternator moves further up and the p/s was run of the front of the cam cover.

http://i36.photobucket.com/albums/e15/123maxiboy/3e23d2c6.jpg

maxi mountings

http://i36.photobucket.com/albums/e15/123maxiboy/0d7da366.jpg

maxi alternator bracket.