PDA

View Full Version : difference between tube


BGHayabusa
24-11-2007, 21:23
what's the difference between a stainless steel tube and a ordinery one? :roll:
schakal
24-11-2007, 22:00
stainless one wont stain 8)
Lunner
24-11-2007, 22:02
ordinary as in mild steel??

Can't believe you're asking this lol.....mild steel will rust easily, stainless, depending on the grade is alot more resistant to rusting
Wobba
24-11-2007, 22:08
Have they invented stainless steel in Bulgaria yet ? :wink:
drsmith1979
24-11-2007, 22:40
haha give him a break, it may not translate very well into bulgarian hence the question....
schakal
24-11-2007, 22:48
did not realise he was from bulgaria my bad :oops:

wobba : your reply only shows how much of an ignorant cnut
you are ,nothing to be proud of imo :roll:
BGHayabusa
24-11-2007, 23:03
Here in Bulgaria stainless steel is expensive for me.
drsmith1979
24-11-2007, 23:08
you should be able to get 'aluminised' steel, this is what they make a lot of exhausts and induction kits out of in the USA. Its basically normal steel with a aluminium coating, gives good stain resistance and finish but for a fraction of the cost. have a look for it
stan
25-11-2007, 17:26
Have they invented stainless steel in Bulgaria yet ? :wink:

LMAO! im cringing and chuckling at this!!
kj16v
25-11-2007, 22:19
Here in Bulgaria stainless steel is expensive for me.

What about if you order it from the UK? www.dynoflow.co.uk are by far the cheapest place that I know of for stainless. Ask him if he will send it by Royal Mail instead of a courier.
BGHayabusa
30-11-2007, 20:06
you should be able to get 'aluminised' steel, this is what they make a lot of exhausts and induction kits out of in the USA. Its basically normal steel with a aluminium coating, gives good stain resistance and finish but for a fraction of the cost. have a look for it

That's exactly what I'm gonna do, because I think it is cheaper and there isn't any difference exept for the weight. BTW how big tubing should I get(50mm ?)?
BGHayabusa
30-11-2007, 20:14
Here in Bulgaria stainless steel is expensive for me.

What about if you order it from the UK? www.dynoflow.co.uk are by far the cheapest place that I know of for stainless. Ask him if he will send it by Royal Mail instead of a courier.

I think that, even that the site is very good especially for this thing, when I add the delivery costs it will get more expensive than if I order it from bulgaria... :wink: