View Full Version : Nuts and bolts
Just ordered a new dogbone mount and other stuff off GSF. I need to know if the bolts come with the mount or not? If not what type do I need to get?
Hopefully tomorrow I'll collect a runabout valver assuming I fix the mount!
nope, never get bolts with parts, just re-use the ones on there, if they are rusted to buy replacements the same size, off the top of my head they are around M10, and 80 and 110mm long......just a guess
Thanks once again Lunner.
can buy some new m10 nylocks and use them if you feel the need. i tend to buy bags of m6 m8 m10 nylocks cheap and always use new nuts..
Cool, yea someone else mentioned nylocks. I'll go hunt for some in the morning!
http://www.screwfix.com/cats/100052/Bolts/Nuts
a little bit down. loads of nylocks.
13138 Nylon Lock Nut M4
100
£1.05
1000
£9.10
10000
£54.98
!
M6 Nylon Lock 16875 Nylon Lock Nut M6
100
£1.06
1000
£6.10
10000
£59.17
!
M8 Nylon Lock 11514 Nylon Lock Nut M8
100
£1.84
1000
£17.51
10000
£129.99
!
M10 Nylon Lock 18688 Nylon Lock Nut M10
10
£0.34
100
£3.16
1000
£27.93
!
M12 Nylon Lock 15746 Nylon Lock Nut M12
10
£0.51
100
£3.75
1000
£27.99
Thats great thanks Maxi. I'll never need a screw ever again!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.